Abstract:Concrete structures in cold regions are highly susceptible to internal cracks due to the periodic variation of temperature and the alternation of drying and wetting in the long term. Conventional damage detecting techniques for concrete are often destructive and need tedious manual operation. Concrete strain monitoring is a non-destructive measurement technique, which provides continuously streaming strain data and has the potential of detecting damage automatically based on a data-driven approach. Temperature-induced strains are highly responsive to damage to concrete structures under the freeze-thaw (F-T) cycles. In this regard, we propose a novel damage detection approach based on temperature-induced strains. The proposed method separates the temperature-induced component from the measured data based on the independent component analysis, which improves the modeling accuracy of the Gaussian processes modeling (GPM) approach for detecting damage. The principle of damage detection is extracting the features related to the damage from the measured strain data. The model residuals of temperature-induced strains are extracted as features that are sensitive to concrete damage. A novel damage index is established to determine the presence of structural damage based on the Kolmogorov Smirnov (KS) test, which estimates the probability distribution of residuals. To increase the reliability of damage detection and decrease the pseudo fault alarm rate, the general extreme value (GEV) theory is considered to determine a reliable threshold limit. A moving window strategy is introduced to perform damage detection and identify the damage occurrence time effectively. Monitoring data of the F-T cycle experiment are utilized to validate the proposed method. The results of three different damage cases demonstrate the effectiveness of the proposed data-driven method in terms of detecting the damage and identifying the damage occurrence time. The variation rules of the concrete temperature characteristics are revealed through the damage detection results under F-T cycles.

Detecting the damage of concrete subjected to fatigue load coupled with freeze-thaw cycles using alternating current electric impedance spectroscopy

Development of Internal Moisture Transfer and Cumulative Residual Strain in Concrete under Freeze-Thaw Cycles

A Gaussian Processes-Based Approach for Damage Detection of Concrete Structure Using Temperature-Induced Strain

Uniaxial Concrete Tension Damage Evolution Using Acoustic Emission Monitoring

Concrete Damage Diagnosis Using Electromechanical Impedance Technique

Restoration of Electromechanical Admittance Signature Via Solving Constrained Optimization Problems for Concrete Structural Damage Identification

Quantifying Fatigue Damage in Reinforced Concrete Beams Through Piezomagnetic Effect: A Fatigue-Magnetomechanical Coupling Approach

Mesoscale Simulation of Fatigue Behavior of Concrete Materials Damaged by Freeze-Thaw Cycles

Freeze-thaw damage assessment of engineered cementitious composites using the electrochemical impedance spectroscopy method

Experimental Examination of Electrical Characteristics for Portland Cement Mortar Frost Damage Evaluation

Stiffness Degradation for Fatigue of Reinforced Concrete Beams after Electrochemical Rehabilitation

Damage Assessment Using The Energy Dissipation Ratio Of Acceleration Signals

Assessment of Fatigue Damage of Prefabricated Concrete Composite Beams with Piezomagnetic Signal

Time-varying damage evolution of concrete under cyclic disturbance loading- an experimental observation utilizing AE and DIC

Automatic assessment of freeze-thaw damage in concrete structures using piezoelectric-based active sensing approach and deep learning technique

Deterioration of Static Mechanical Properties of RC Beams Due to Bond Damage Induced by Electrochemical Rehabilitation

Deep hybrid neural network-aided electromechanical impedance method for automated damage detection of lining concrete under freeze-thaw cycling

Stress Analysis for Concrete Materials under Multiple Freeze-Thaw Cycles

A temperature compensation approach using dynamic time warping for electro-mechanical admittance-based concrete structural damage identification

Investigating the Damage Evolution of Sandstone Using Electrical Impedance Spectroscopy

Characterization of Microstructure and Moisture Distribution Evolution of Concrete Using AC Impedance Spectroscopy