Strategies for Enhancing the Stability of Lithium Metal Anodes in Solid-State Electrolytes

Hanbyeol Lee,Taeho Yoon,Oh B. Chae

DOI: https://doi.org/10.3390/mi15040453

IF: 3.4

2024-03-29

Micromachines

Abstract:The current commercially used anode material, graphite, has a theoretical capacity of only 372 mAh/g, leading to a relatively low energy density. Lithium (Li) metal is a promising candidate as an anode for enhancing energy density; however, challenges related to safety and performance arise due to Li's dendritic growth, which needs to be addressed. Owing to these critical issues in Li metal batteries, all-solid-state lithium-ion batteries (ASSLIBs) have attracted considerable interest due to their superior energy density and enhanced safety features. Among the key components of ASSLIBs, solid-state electrolytes (SSEs) play a vital role in determining their overall performance. Various types of SSEs, including sulfides, oxides, and polymers, have been extensively investigated for Li metal anodes. Sulfide SSEs have demonstrated high ion conductivity; however, dendrite formation and a limited electrochemical window hinder the commercialization of ASSLIBs due to safety concerns. Conversely, oxide SSEs exhibit a wide electrochemical window, but compatibility issues with Li metal lead to interfacial resistance problems. Polymer SSEs have the advantage of flexibility; however their limited ion conductivity poses challenges for commercialization. This review aims to provide an overview of the distinctive characteristics and inherent challenges associated with each SSE type for Li metal anodes while also proposing potential pathways for future enhancements based on prior research findings.

chemistry, analytical,nanoscience & nanotechnology,instruments & instrumentation,physics, applied

What problem does this paper attempt to address?

The paper primarily explores the issue of enhancing the stability of lithium metal anodes in solid-state electrolytes. Specifically, the research focuses on solid-state electrolytes (SSEs) used in lithium metal batteries (LiMBs), particularly sulfide, oxide, and polymer types of solid-state electrolytes.

The paper points out that the theoretical capacity of currently commercial graphite anode materials is relatively low (372 mAh/g), which limits the energy density of lithium-ion batteries. Therefore, lithium metal, with its high theoretical capacity and low reduction potential, is considered a highly promising next-generation anode material. However, one of the main challenges faced by lithium metal batteries is the formation of lithium dendrites, which can lead to safety hazards (such as fires and explosions). To address these issues, researchers have begun exploring the use of solid-state electrolytes to replace traditional liquid electrolytes, aiming to improve the safety and energy density of lithium metal batteries.

The paper further analyzes the characteristics and challenges of different types of solid-state electrolytes:

1. **Sulfide Solid-State Electrolytes**: These have relatively high ionic conductivity, close to the level of organic liquid electrolytes, but they have insufficient inhibition of lithium dendrite growth and their narrow electrochemical window may trigger adverse reactions with lithium metal.

2. **Oxide Solid-State Electrolytes**: Especially the garnet-type structure Li7La3Zr2O12 (LLZO), which has attracted attention due to its good stability, wide electrochemical window, and ease of handling. However, oxide solid-state electrolytes also face interface resistance issues, particularly the formation of a Li2CO3 layer on the surface when in contact with lithium metal, which increases interface resistance.

To address these challenges, the paper proposes several strategies to improve the compatibility between lithium metal and solid-state electrolytes:

- Using LiF or LiI layers and specific solutions to infiltrate sulfide solid-state electrolytes to inhibit lithium dendrite growth;
- Utilizing Atomic Layer Deposition (ALD) technology to prepare coatings on the surface of sulfide solid-state electrolyte powders, reducing side reactions and forming artificial SEI layers to achieve uniform lithium deposition;
- Adjusting the composition of sulfide solid-state electrolytes by replacing certain cations or anions (e.g., partial replacement of sulfur with oxygen) to improve stability and control decomposition products.

In summary, the paper aims to provide a comprehensive overview of the characteristics and challenges of different types of solid-state electrolytes in lithium metal anode applications and proposes improvement directions based on existing research findings.