Abstract:P2-type layered oxides are considered as promising cathode materials for rechargeable sodium ion batteries, but preparing P2-type cathodes with high-operating voltage and long-life is still a big challenge. Herein, spherical P2-type cathode Na0.67Ni0.17Co0.17Mn0.66Ti0.05Mg0.05O2 has been designed, and the critical roles of Ti and Mg on electrochemical performance of the cathodes are systematically investigated. The high-temperature XRD clearly exhibits the forming process of the pure phase material and suggests that the most suitable calcination temperature is 850 °C. The Ti/Mg cosubstitution does not break the long-range P2 structure and the spherical morphology of the material. In the electrochemical processes, the Na0.67Ni0.17Co0.17Mn0.56Ti0.05Mg0.05O2 electrode exhibits better electrochemical performance than that of the undoped Na0.67Ni0.17Co0.17Mn0.66O2. It delivers an initial reversible capacity of 151 mAh g–1 (2–4.5 V) with an average voltage of 3.8 V and exhibits a high capacity retention of 87.7% after 300 cycles at 100 mA g–1. The improved electrochemical performance benefits from the Ti/Mg cosubstitution; Ti improves the average voltage while Mg and Ti significantly mitigate the undesired P2 → O2 phase transition of the cathode, and these two elements jointly promote the development of the electrochemical performance. This strategy is also applicable to the optimization design of layered transition oxides and provides a new approach to prepare high-voltage, long-life cathodes for sodium ion batteries.This article has not yet been cited by other publications.

P2-Na<sub>2/3</sub> Ni<sub>2/3</sub>Te<sub>1/3</sub>O<sub>2</sub> Cathode for Na-ion Batteries with High Voltage and Excellent Stability

P2‐Na2/3Ni2/3Te1/3O2 Cathode for Na‐ion Batteries with High Voltage and Excellent Stability

Designing High-Performance Nanostructured P2-type Cathode Based on a Template-free Modified Pechini Method for Sodium-Ion Batteries

Designing Water/air-Stable P2-layered Cathodes with Delayed P2–O2 Phase Transition by Composition and Structure Engineering for Sodium-Ion Batteries at High Voltage

P2-type Na2/3Ni1/3Mn2/3O2 Cathode Material with Excellent Rate and Cycling Performance for Sodium-Ion Batteries

Electrochemical performance and structural stability of air-stable Na0.67Ni0.33Mn0.67-xTixO2 cathode materials for high-performance sodium-ion batteries

Ti4+ Substitution Suppressing P2-O2 Phase Transition to Construct Stable P2-Na0.67ni0.33mn0.67o2 Cathode for Long-Term Durable Sodium-Ion Batteries

Enabling Rapid and Stable Sodium Storage via a P2-Type Layered Cathode with High-Voltage Zero-Phase Transition Behavior

Achieving High Stability and Performance in P2‐Type Mn‐Based Layered Oxides with Tetravalent Cations for Sodium‐Ion Batteries

High-Operating Voltage, Long-Life Layered Oxides for Sodium Ion Batteries Enabled by Cosubstitution of Titanium and Magnesium

Heteroatom-Substituted P2–Na 2/3 Ni 1/4 Mg 1/12 Mn 2/3 O 2 Cathode with {010} Exposing Facets Boost Anionic Activity and High-Rate Performance for Na-Ion Batteries

Zinc-substituted P2-type Na0.67Ni0.23Zn0.1Mn0.67O2 cathode with improved rate capability and cyclic stability for sodium-ion storage at high voltage

An Utrastable Mg/Zr Modified P2‐Type Na2/3Ni1/3Mn2/3O2 Cathode Material for High‐Power Sodium‐Ion Batteries

Air-Stable High-Entropy Layered Oxide Cathode with Enhanced Cycling Stability for Sodium-Ion Batteries

P3/O3 Integrated Layered Oxide as High‐Power and Long‐Life Cathode toward Na‐Ion Batteries

Comprehensive Review of P2-Type Na2/3Ni1/3Mn2/3O2, a Potential Cathode for Practical Application of Na-Ion Batteries.

Stable prismatic layer structured cathode material via Cation mixing for sodium ion battery

Improving high-voltage high-rate performance of P2 layered oxide cathode by dual-ion doping strategy for sodium-ion batteries

P2/O3 biphasic Ni/Fe/Mn-based layered cathode with high capacity and great cyclability for sodium-ion batteries

Advanced P2-Na2/3Ni1/3Mn7/12Fe1/12O2 Cathode Material with Suppressed P2-O2 Phase Transition toward High-Performance Sodium-Ion Battery.

Stabilization of P2-type Cathode at 4.5 V by “la Pillar” in Na Layer with a La–O Orbital Hybridization for Long-Life and High-Energy-density Na-ion Batteries