Abstract:Na4Fe3(PO4)2(P2O7) (NFPP) is regarded as a promising cathode material for sodium-ion batteries (SIBs) owing to its low cost, easy manufacture, environmental purity, high structural stability, unique three-dimensional Na-ion diffusion channels, and appropriate working voltage. However, for NFPP, the low conductivity of electrons and ions limits their capacity and power density. The generation of NaFeP2O7 and NaFePO4 inhibits the diffusion of sodium ions and reduces reversible capacity and rate performance during the manufacturing process in synthesis methods. Herein, we report an entropy-driven approach to enhance the electronic conductivity and, concurrently, phase purity of NFPP as the superior cathode in sodium-ion batteries. This approach was realized via Ti ions substituting different ratios of Fe-occupied sites in the NFPP lattice (denoted as NTFPP-X, T is the Ti in the lattice, X is the ratio of Ti-substitution) with the configurational entropic increment of the lattice structures from 0.68 R to 0.79 R. Specifically, 5% Ti-substituted lattice (NTFPP-0.05) inducing entropic augmentation not only improves the electronic conductivity from 7.1 × 10-2 S/m to 8.6 × 10-2 S/m but also generates the pure-phase of NFPP (suppressing the impure phases of the NaFeP2O7 and NaFePO4) of the lattice structure, which is validated by a series of characterizations, including powder X-ray diffraction (XRD), Fourier transform infrared spectra (FT-IR), X-ray photoelectron spectroscopy (XPS), and density functional theory (DFT). Benefiting from the Ti replacement in the lattice, the optimal NTFPP-0.05 composite shows a high first discharge capacity (118.5 mAh g-1 at 0.1 C), superior rate performance (70.5 mAh g-1 at 10 C), and excellent long cycling life (1200 cycles at 10 C with capacity retention of 86.9%). This research proposes a new entropy-driven approach to improve the electrochemical performance of NFPP and reports a low-cost, ultrastable, and high-rate cathode material of NTFPP-0.05 for SIBs.

Bifunctional Na-Deficient Strategy Induced Pure Phase Na4-xFe3(PO4)2P2O7 Cathode with High Capacity for Sodium-Ion Batteries

Activating the Inert Na1 Sites in Na<sub>2</sub>FePO<sub>4</sub>F Toward High Performance Sodium Storage

F and Si Dual-Doping Induced Oxygen Vacancies in a Na4Fe3(PO4)2P2O7 Cathode Enables Boosting Electrochemical Performance for Sodium Storage

Insights into the Phase Purity and Storage Mechanism of Nonstoichiometric Na3.4Fe2.4(PO4)1.4P2O7 Cathode for High‐Mass‐Loading and High‐Power‐Density Sodium‐Ion Batteries

A New Polyanion Na3fe2(Po4)P2o7 Cathode With High Electrochemical Performance For Sodium-Ion Batteries

Entropy-Driven Enhancement of the Conductivity and Phase Purity of Na4Fe3(PO4)2P2O7 as the Superior Cathode in Sodium-Ion Batteries

Zero-strain Co-doped Na2FeP2O7/carbon Delivers Superior Rate Capability and Long-Cycle Stability for Sodium Ion Batteries

Entropy-Enhanced Multi-Doping Strategy to Promote the Electrochemical Performance of Na4Fe3(PO4)2P2O7

An Air-stable Iron/manganese-based Phosphate Cathode for High Performance Sodium-ion Batteries

Robust iron-based cathode for ultralong-lasting Na-ion battery with a wide operation-temperature

A novel Fe-defect induced pure-phase Na4Fe2.91(PO4)2P2O7 cathode material with high capacity and ultra-long lifetime for low-cost sodium-ion batteries

Achieving Fast and Stable Sodium Storage in Na4Fe3(PO4)2(P2O7) via Entropy Engineering

A New Polyanion Na 3 Fe 2 (PO 4 )P 2 O 7 Cathode with High Electrochemical Performance for Sodium-Ion Batteries

Reversible OP4 phase in P2–Na2/3Ni1/3Mn2/3O2 sodium ion cathode

Unlocking iron-based mixed-phosphate cathode for sodium-ion batteries through off-stoichiometry

Structural modulation of Na4Fe3(PO4)2P2O7 via cation engineering towards high-rate and long-cycling sodium-ion batteries

Robust NASICON-type iron-based Na4Fe3(PO4)2(P2O7) cathode for high temperature sodium-ion batteries

Extending the solid solution range of sodium ferric pyrophosphate: Off‐stoichiometric Na3Fe2.5(P2O7)2 as a novel cathode for sodium‐ion batteries

Dual-strategy of carbon-coating and nanoengineering enables reversible and durable Na storage in an iron-based pyrophosphate cathode

Unlocking Fast and Highly Reversible Sodium Storage in Fe-Based Mixed Polyanion Cathodes for Low-Cost and High-Performance Sodium-Ion Batteries

A Yolk–Shell‐Structured FePO4 Cathode for High‐Rate and Long‐Cycling Sodium‐Ion Batteries