Abstract:Iron‐based pyrophosphate (Na4−αFe2+α/2(P2O7)2) is an attractive cathode for sodium‐ion batteries due to its cost‐effectiveness, feasible channels, and high operation voltage. Extending the solid solution range of Na4−αFe2+α/2(P2O7)2 enables generation of a novel off‐stoichiometric phase. Structural resolution, theoretical calculations, and sodium storage performance are comprehensively studied to disclose its structure–property relationship in sodium‐ion batteries. Iron‐based pyrophosphates are attractive cathodes for sodium‐ion batteries due to their large framework, cost‐effectiveness, and high energy density. However, the understanding of the crystal structure is scarce and only a limited candidates have been reported so far. In this work, we found for the first time that a continuous solid solution, Na4−αFe2+α/2(P2O7)2 (0 ≤ α ≤ 1, could be obtained by mutual substitution of cations at center‐symmetric Na3 and Na4 sites while keeping the crystal building blocks of anionic P2O7 unchanged. In particular, a novel off‐stoichiometric Na3Fe2.5(P2O7)2 is thus proposed, and its structure, energy storage mechanism, and electrochemical performance are extensively investigated to unveil the structure–function relationship. The as‐prepared off‐stoichiometric electrode delivers appealing performance with a reversible discharge capacity of 83 mAh g−1, a working voltage of 2.9 V (vs. Na+/Na), the retention of 89.2% of the initial capacity after 500 cycles, and enhanced rate capability of 51 mAh g−1 at a current density of 1600 mA g−1. This research shows that sodium ferric pyrophosphate could form extended solid solution composition and promising phase is concealed in the range of Na4−αFe2+α/2(P2O7)2, offering more chances for exploration of new cathode materials for the construction of high‐performance SIBs.

Unlocking iron-based mixed-phosphate cathode for sodium-ion batteries through off-stoichiometry

Activating the Inert Na1 Sites in Na<sub>2</sub>FePO<sub>4</sub>F Toward High Performance Sodium Storage

An Air-stable Iron/manganese-based Phosphate Cathode for High Performance Sodium-ion Batteries

A New Polyanion Na3fe2(Po4)P2o7 Cathode With High Electrochemical Performance For Sodium-Ion Batteries

A New Polyanion Na 3 Fe 2 (PO 4 )P 2 O 7 Cathode with High Electrochemical Performance for Sodium-Ion Batteries

Unlocking Fast and Highly Reversible Sodium Storage in Fe-Based Mixed Polyanion Cathodes for Low-Cost and High-Performance Sodium-Ion Batteries

Enhanced Silicon Diphosphide-Carbon Composite Anode for Long-Cycle, High-Efficient Sodium Ion Batteries

Insights into the Phase Purity and Storage Mechanism of Nonstoichiometric Na3.4Fe2.4(PO4)1.4P2O7 Cathode for High‐Mass‐Loading and High‐Power‐Density Sodium‐Ion Batteries

Extending the solid solution range of sodium ferric pyrophosphate: Off‐stoichiometric Na3Fe2.5(P2O7)2 as a novel cathode for sodium‐ion batteries

P2/O3 Biphasic Layered Oxide Heterojunction: A Cathode for High-Capacity Sodium-Ion Batteries

A High Capacity, Good Safety and Low Cost Na2FeSiO4-Based Cathode for Rechargeable Sodium-Ion Battery.

Dual-strategy of carbon-coating and nanoengineering enables reversible and durable Na storage in an iron-based pyrophosphate cathode

P2/O3 biphasic Fe/Mn-based layered oxide cathode with ultrahigh capacity and great cyclability for sodium ion batteries

A Yolk–Shell‐Structured FePO4 Cathode for High‐Rate and Long‐Cycling Sodium‐Ion Batteries

Structural modulation of Na4Fe3(PO4)2P2O7 via cation engineering towards high-rate and long-cycling sodium-ion batteries

Robust iron-based cathode for ultralong-lasting Na-ion battery with a wide operation-temperature

Reversible OP4 phase in P2–Na2/3Ni1/3Mn2/3O2 sodium ion cathode

Air stable and fast-charging cathode material for all climate sodium-ion batteries

Robust NASICON-type iron-based Na4Fe3(PO4)2(P2O7) cathode for high temperature sodium-ion batteries

Low-cost layered oxide cathode involving cationic and anionic redox with a complete solid-solution sodium-storage behavior

Constructing P 2/O3 biphasic structure of Fe/Mn-based layered oxide cathode for high-performance sodium-ion batteries