Abstract:This article proposes adaptive torque ripple suppression methods by utilizing resonant controllers during the single-phase open-circuit fault-tolerant operation of a three-phase star-connected permanent magnet synchronous motor (PMSM). A zero-sequence current is supposed to be injected to maintain the postfault torque the same as the prefault torque. According to the postfault PMSM model, a feedforward voltage compensation can be adopted to inject the zero-sequence currents and, hence, attenuate the postfault speed and torque ripples in the vector control framework. However, the feedforward voltage compensation, which is related to the phase resistance and leakage inductance, may be inaccurate due to the temperature variation, etc., and hence, an unexpected second harmonic torque ripple still exists. In this article, the adaptive suppression methods of the second harmonic torque are proposed. The first one constructs a novel closed current loop of the zero-axis and the second one modifies the controllers in the dq-axis current loop. These methods are based on the resonant controllers, which can adaptively compensate for the voltage needed for the zero-sequence current injection. Experiments are implemented based on a four-leg inverter and the performance comparison between the feedforward compensation and adaptive compensation validates that the proposed methods can effectively suppress the postfault torque and speed ripple.

Minimum Torque Ripple Control for Brushless Doubly-Fed Induction Generator-DC System under Power Winding Open-Phase Fault

Harmonic Injection-Based Torque Ripple Reduction of PMSM with Improved DC-Link Voltage Utilization

Torque Ripple Suppression Control for Dual Three-Phase Permanent-Magnet Synchronous Motor

Torque ripple minimization for switched reluctance motors by online modification of torque sharing function

A Novel Harmonic Current Control Method for Torque Ripple Reduction of SPMSM Considering DC-Link Voltage Limit

Torque Ripple Suppression for Standalone Brushless Doubly-Fed Induction Generator-DC System Based on Power Winding Harmonic Current Control

Reduction of Commutation Torque Ripple in Brushless DC Motors

Optimized Torque Ripple Suppression Method for Standalone Brushless Doubly-Fed Induction Generator with Special Loads

Harmonics in Brushless Doubly Fed Induction Generator for Torque Ripple Analysis and Modeling

Adaptive Torque Ripple Suppression Methods of Three-Phase PMSM During Single-Phase Open-Circuit Fault-Tolerant Operation

An Improved Repetitive Control of DFIG-DC System for Torque Ripple Suppression

Improved Direct Resonant Control for Suppressing Torque Ripple and Reducing Harmonic Current Losses of DFIG-DC System

Torque Ripple Suppression of Dfig under Unbalanced Grid Voltage Conditions Using Reduced-Order Generalized Integrators

Fault Tolerant Control of Harmonic Injected Nine-Phase Flux Switching Permanent Magnet Motor Drive System

Torque Ripple Suppression Method with Reduced Switching Frequency for Open-Winding PMSM Drives with Common DC Bus.

Direct Resonant Control Strategy for Torque Ripple Mitigation of Dfig Connected to Dc Link Through Diode Rectifier on Stator

Research on Torque Ripple Minimization Strategy for Direct Torque Control of Induction Motors

Torque Oscillation Suppression of DFIG-based Wind Turbines under Unbalanced and Distorted Grid Voltage Conditions

Improved Vector Control of Brushless Doubly Fed Induction Generator under Unbalanced Grid Conditions for Offshore Wind Power Generation

Modeling and Control for Open-Winding PMSM Under Open-Phase Fault Based on New Coordinate Transformations

A Combined Finite Element-Domain Elimination Method for Minimizing Torque Ripples in Inverter-Fed AC Motor Drive Systems