Abstract:To strengthen face-centered cubic structured high entropy alloys, this paper explores a new method of ceramic reinforced CoCrFeNiMo 0.2 high entropy alloy composite gradient coating. In this study, four sets of gradients were created by first preparing a pristine alloy coating without silicon carbide content on the substrate, followed by preparing composite coatings with varying silicon carbide mass fractions (8 %, 16 %, 24 %) on the pristine coatings. The coatings were then analyzed for their phase composition, microstructure, microstructure evolution process, and friction wear properties. The study reveals that the microstructure of the initial alloy coating consists of a single-phase face-centered cubic solid solution. It is observed that intragranular segregation occurs in the coating, resulting in the boundary enrichment of Mo and Cr elements. As the silicon carbide addition increases, the segregation behavior becomes more pronounced, and the generation of body-centered cubic phase is observed. The second, third, and fourth layers exhibit significantly higher average hardness, measuring at 594 HV, 722 HV, and 788 HV respectively. This can be attributed to the presence of body-centered cubic structure, carbide, and grain boundary strengthening effects. On average, the hardness of these layers is three to four times higher than that of the first layer. With an increase in the number of layers, the wear mechanism changes from adhesive wear to abrasive wear. The wear rates of the second, third, and fourth layers were all reduced by at least 87 % compared to the first layer. However, there were different forms of abrasive wear observed between these layers. The findings of this study have significant engineering implications.

Effect of TiAlSiN Gradient Structure Design on Mechanical Properties and Microstructure of Coatings

The Microstructure of Al2O3/TiO2-NiCrBSi Graded Thermal Barrier Coatings Produced by Flame Spraying

Influence of film structure on the microstructure and properties of TiAlN coatings on Al-Si alloys

Effect of Gradient Multilayer Design on Tribological Performance of TiN/TiSiN Coatings Prepared by Cathodic Arc Ion Plating

Effect of Multi-Interfacial Structure on Fracture Resistance of Composite TiSiN/Ag/TiSiN Multilayer Coating

Structure, Mechanical and Tribological Properties of Self-Toughening TiSiN/Ag Multilayer Coatings on Ti6Al4V Prepared by Arc Ion Plating

Microstructure, mechanical and tribological properties of gradient CrAlSiN coatings deposited by magnetron sputtering and arc ion plating technology

Influence of multi-interfacial structure on mechanical and tribological properties of TiSiN/Ag multilayer coatings

Al–Cu-based in-situ reinforced gradient coating on aluminum alloy by laser cladding: Tribological behavior under gradient loading and thermal conditions

Tribological performance of the gradient composite TiAlSiN coating with various friction pairs

Study on gradient structure and interface mechanical properties of n–8YSZ/AlCoCrFeNi high–entropy coatings

In-situ Ti(C, N) reinforced AlCoCrFeNiSi-based high entropy alloy coating with functional gradient double-layer structure fabricated by laser cladding

Investigation on Microstructure and Wear Properties of an <i>In Situ</i> Synthesized TiC Gradient Coating

Microstructure and Tribological Behavior of TiAlSiN Coatings Deposited by Deep Oscillation Magnetron Sputtering

Microstructure, mechanical properties and tribological behaviors of TiAlN-Ag composite coatings by pulsed magnetron sputtering method

Properties and Performance of TiAlSiN and AlCrN Monolayer and Multilayer Coatings for Turning Ti-6Al-4V

The influence of multilayer structure on mechanical behavior of TiN/TiAlSiN multilayer coating

Microstructure and tribological behavior of CoCrFeNiMo 0.2 /SiC high-entropy alloy gradient composite coating prepared by laser cladding

Structural, mechanical and corrosion behaviors of the homogeneous and gradient CrAlSiN coatings in 3.5% NaCl solution

High-Temperature Hot Corrosion Resistance of CrAl/NiCoCrAlY/AlSiY Gradient Composite Coating on TiAl Alloy

Mechanical, oxidation, and cutting properties of AlCrN/AlTiSiN nano-multilayer coatings