Abstract:The growing demand for nickel and cobalt increases the interest in extracting metals from secondary sources, such as flotation tailings. A preferential strategy for the processing of the complex and/or low-grade secondary sources may be material integration into existing primary processes. In this research, a robust sulfuric acid leaching treatment was studied for metal extraction from sulfidic flotation tailings (Ni 0.45 %, Co 0.80 %, Cu 0.20 %, Zn 0.58 %). The impact of leaching parameters on metals extraction was studied; oxygen gas (1–2 L/min), ferric ions (0.05–0.3 M), and hydrogen peroxide (0.5–0.8 M), temperature (30–90 °C), sulfuric acid concentration (0.2–2 M), and solid–liquid ratio (50–100 g/L). It was found that after 30-minutes 20.0 % of nickel, 5.6 % of cobalt, and 33.0 % of the main impurity iron were extracted using oxygen as oxidant. Increasing temperature and sulfuric acid concentration were shown to have a positive effect on extraction. Also, with the further addition of ferric ions, cobalt extraction could be slightly increased (from 6.2 % to 8.3 %) whereas both nickel and cobalt could be increased with hydrogen peroxide (nickel 22.9 %, cobalt 14.2 %). However, the use of H 2 O 2 can be challenging due to its high environmental footprint as well as partial decomposition by ferric ions, increasing H 2 O 2 consumption further. The results suggest that the mineralogy of the investigated tailings limited feasible metals extraction using atmospheric conditions up to ≈ 20 % for nickel and ≈ 10 % for cobalt, with nickel distributing stronger into non-refractory minerals while cobalt reported more to pyrite. For other base metals, zinc extraction from sphalerite was shown to be efficient (up to ≈ 90 %) whereas copper extraction was limited (up to ≈ 30 %). In future, such atmospheric sulfuric acid leaching may provide a robust recovery route for non-refractory minerals present in the tailings, while full valorization of sulfide tailings matrix will require higher intensity processing with technologies such as pressure oxidation (POX), concentrated chloride leaching, bioleaching, roasting-leaching or very fine milling of the raw material prior to atmospheric leaching.

Highly Efficient Resource Recovery from Polymetallic Sulfide Ores under Neutral-Alkaline Conditions: Chemical Oxidation and Coordination Leaching

A new method for recovering valuable metals from low-grade nickeliferous oxide ores

Electrochemical Behavior Of Ocean Polymetallic Nodules And Low-Grade Nickel Sulfide Ore In Acidithiobacillus Ferrooxidans-Coupled Bio-Leaching

Recovery of Nickel, Copper and Cobalt from Low-Grade Ni–Cu Sulfide Tailings

Recovery Of Copper, Nickel And Cobalt From Acidic Pressure Leaching Solutions Of Low-Grade Sulfide Flotation Concentrates

A Method for Extracting Valuable Metals from Low Nickel Matte by Non-Oxidative Leaching with H2SO4

Selective extraction performance of Ni, Cu, Co, and Mn adopted by a coupled leaching of low-grade Ni-sulfide ore and polymetallic Mn-oxide ore in sulphuric acid solutions

Effective Recovery of Ni and Cu from Low-Grade Nickel Sulfide Concentrate: Process Kinetics and Preparation of Ni80Cu20O Material

Acidithiobacillus ferrooxidans: performances on the low-grade polymetallic oxidized-manganese and sulfur-nickel ores redox system

A New Technique for Recovering Copper from Complex Copper Oxide Ore by Flotation and Metallurgical Processing

Atmospheric leaching of Ni, Co, Cu, and Zn from sulfide tailings using various oxidants

A New Method and Mechanism of Oxidation/Ammonia Leaching-Phosphoric Acid Synergistic Regulation of Nickel Smelting Slag for Graded High-Value Recovery of Iron and Nickel

A Novel Process for Simultaneously Extracting Ni and Cu from Mixed Oxide-Sulfide Copper-Nickel Ore with Highly Alkaline Gangue Via FeCl3∙6H2O Chlorination and Water Leaching

Efficient Extraction of Cobalt and Copper: Leveraging Redox Chemistry in Oxide and Sulfide Copper-Cobalt Ores

Bioleaching of a Low Grade Nickel–copper–cobalt Sulfide Ore

Enrichment of valuable metals from the sulfuric acid leach liquors of nickeliferous oxide ores

Extraction of Copper and Nickel from Low-Grade Nickel Sulfide Ore by Low-Temperature Roasting, Selective Decomposition and Water-Leaching Process

Synergetic Utilization of Copper Slag and Ferruginous Manganese Ore Via Co-Reduction Followed by Magnetic Separation Process

Optimizing the Leaching Parameters and Studying the Kinetics of Nickel and Cobalt Recovery from Xinjiang Nickel–Cobalt Slag

Efficient Flotation Recovery of Lead and Zinc from Refractory Lead-Zinc Ores under Low Alkaline Conditions

Bioleaching of a complex Co-Ni-Cu sulfide flotation concentrate by Bacillus megaterium QM B1551 at neutral pH