Abstract:To exploit the potential of the reconfigurable intelligent surface (RIS) in supporting integrated sensing and communication (ISAC), this paper proposes a novel joint active and passive beamforming design for RIS-enabled ISAC system in consideration of the target size. First, the detection probability for target sensing is derived in closed-form based on the illumination power on an approximated scattering surface area of the target, and a new concept of ultimate detection resolution (UDR) is defined for the first time to measure the target detection capability. Then, an optimization problem is formulated to maximize the signal-to-noise ratio (SNR) at the user-equipment (UE) under a minimum detection probability constraint. To solve this non-convex problem, a novel alternative optimization approach is developed. In this approach, the solutions of the communication and sensing beamformers are obtained by our proposed bisection-search based method. The optimal receive combining vector is derived from an equivalent Rayleigh-quotient problem. To optimize the RIS phase shifts, the Charnes-Cooper transformation is conducted to cope with the fractional objective, and a novel convexification process is proposed to convexify the detection probability constraint with matrix operations and a real-valued first-order Taylor expansion. After the convexification, a successive convex approximation (SCA) based algorithm is designed to yield a suboptimal phase-shift solution. Finally, the overall optimization algorithm is built, followed by detailed analyses on its computational complexity, convergence behavior and problem feasibility condition. Extensive simulations are carried out to testify the analytical properties of the proposed beamforming design, and to reveal two important trade-offs, namely, communication vs. sensing trade-off and UDR vs. sensing-duration trade-off. In comparison with several existing benchmarks, our proposed approach is validated to be superior when detect- ng targets with practical sizes.

Active RIS-Assisted Integrated Sensing and Communication Systems: Joint Receive-Transmit Beamforming and Reflection Design

RIS-Aided Integrated Sensing and Communication: Joint Beamforming and Reflection Design

Active RIS Aided ISAC Systems: Beamforming Design and Performance Analysis

Joint Design of Transmit Waveform and Passive Beamforming for RIS-assisted ISAC System

Joint Transceiver Beamforming and Reflecting Design for Active RIS-Aided ISAC Systems

Joint Beamforming Design for Active RIS-Aided THz ISAC Systems with Delay Alignment Modulation.

Beamforming Design for Hybrid Active-Passive RIS Assisted Integrated Sensing and Communications

Joint Active and Passive Beamforming Design for Hybrid RIS-Aided Integrated Sensing and Communication

Joint Beamforming Design for RIS-Assisted Integrated Sensing and Communication Systems

Cramer-Rao Bound Optimization for Active RIS-Empowered ISAC Systems

Joint Beamforming and Reflection Design for RIS-assisted ISAC Systems

Optimal Beamforming Design for ISAC with Sensor-Aided Active RIS

Secure Beamforming Design for RIS-Assisted Integrated Sensing and Communication Systems

Joint Mode Selection and Beamforming Designs for Hybrid-RIS Assisted ISAC Systems

Robust Beamforming for RIS-Assisted Wireless Communications with Discrete Phase Shifts.

Joint Active and Passive Beamforming Design for Reconfigurable Intelligent Surface Enabled Integrated Sensing and Communication

Joint Beamforming and Mode Selection Design for Hybrid RIS Assisted Integrated Sensing and Communications

Beamforming Design for Reconfigurable Intelligent Surface Enhanced Full-duplex Ambient Backscatter Communication Networks

RIS-Enhanced Cognitive Integrated Sensing and Communication: Joint Beamforming and Spectrum Sensing

SNR/CRB-Constrained Joint Beamforming and Reflection Designs for RIS-ISAC Systems

Joint Beamforming for RIS-Assisted Integrated Sensing and Communication Systems