Abstract:Active reconfigurable intelligent surfaces (RISs) can improve the performance of integrated sensing and communication (ISAC), and therefore enable simultaneous data transmission and target sensing. However, when the line-of-sight (LoS) link between the base station and the sensing target is blocked, the sensing signals suffer from severe path loss, resulting in an inferior sensing performance. To address this issue, this paper employs a sensor-aided active RIS to enhance ISAC system performance. The goal is to maximize the signal-to-noise ratio of the echo signal from the target at the sensor-array while meeting constraints on communication signal quality, power budgets, and RIS amplification limits. The optimization problem is challenging due to its non-convex nature and the coupling between the optimization variables. We propose a closed-form solution for receive beamforming, and a successive convex approximation based iterative method for transmit and reflection beamforming design. Simulation results demonstrate the advantage of the proposed sensor-aided active RIS-assisted system model over its non-sensor-aided counterpart.

What problem does this paper attempt to address?

This paper attempts to solve the problem of sensing performance degradation due to severe path loss in the Integrated Sensing and Communication (ISAC) system when the Line - of - Sight (LoS) path between the base station and the sensing target is blocked. Specifically, the authors propose an active reconfigurable intelligent surface (Active RIS) with sensor assistance to enhance the performance of the ISAC system. ### Main problems 1. **Blocking of the line - of - sight path**: When the line - of - sight path between the base station and the target is blocked, the sensing signal will suffer from severe path loss, resulting in a significant decline in sensing performance. 2. **Optimization challenges**: In order to improve the Signal - to - Noise Ratio (SNR) of the echo signal, optimization needs to be carried out under constraints such as meeting the communication signal quality, power budget, and RIS amplification limitations. However, the optimization problem is non - convex, and there is strong coupling between the optimization variables, making the solution complex. ### Solutions The authors propose an optimization model aimed at maximizing the Signal - to - Noise Ratio (SNR) of the echo signal from the target to the sensor array while satisfying the following constraints: - Quality requirements of the communication signal (SINR threshold) - The total power consumption of the system does not exceed the given maximum power budget - The amplification factor of the RIS does not exceed the maximum allowable value - Unit - norm constraint of the receive beamformer ### Method overview 1. **Receive beamformer design**: Obtain the closed - form solution of the receive beamformer through the generalized Rayleigh quotient method. 2. **Transmit beamformer and RIS matrix design**: Use the successive convex approximation (SCA) method to iteratively solve the design problems of the transmit beamformer and RIS matrix. ### Experimental results The simulation results show that the proposed sensor - assisted active RIS system has a significant advantage in terms of radar SNR compared to the system without sensor assistance. In particular, when the ratio of the number of sensors to the total number of RIS elements is approximately 0.3, the system performance is optimal, which is about 4 dB higher than the performance in extreme cases, corresponding to an approximately 2.5 - fold improvement in echo SNR. ### Summary This research effectively solves the problem of sensing performance degradation caused by the blocking of the line - of - sight path in the ISAC system by introducing sensor - assisted active RIS, and improves the overall performance of the system through optimized beamforming design.

Optimal Beamforming Design for ISAC with Sensor-Aided Active RIS

Beamforming Design for Hybrid Active-Passive RIS Assisted Integrated Sensing and Communications

RIS-Aided Integrated Sensing and Communication: Joint Beamforming and Reflection Design

Secure Beamforming Design for RIS-Assisted Integrated Sensing and Communication Systems

Joint Active and Passive Beamforming Design for Reconfigurable Intelligent Surface Enabled Integrated Sensing and Communication

Joint Beamforming Design for Active RIS-Aided THz ISAC Systems with Delay Alignment Modulation.

Joint Beamforming Design for RIS-Assisted Integrated Sensing and Communication Systems

Active RIS Aided ISAC Systems: Beamforming Design and Performance Analysis

Joint Beamforming for RIS-Assisted Integrated Sensing and Communication Systems

Robust Beamforming for RIS-Assisted Wireless Communications with Discrete Phase Shifts.

Joint Design of Transmit Waveform and Passive Beamforming for RIS-assisted ISAC System

Joint Active and Passive Beamforming Design for Hybrid RIS-Aided Integrated Sensing and Communication

Joint Transceiver Beamforming and Reflecting Design for Active RIS-Aided ISAC Systems

Joint Beamforming and Reflection Design for RIS-assisted ISAC Systems

Robust Joint Active-Passive Beamforming Design for IRS-Assisted ISAC Systems

Cramer-Rao Bound Optimization for Active RIS-Empowered ISAC Systems

Beamforming Design for Reconfigurable Intelligent Surface Enhanced Full-duplex Ambient Backscatter Communication Networks

Low Dynamic Range for RIS-aided Bistatic Integrated Sensing and Communication

Joint Mode Selection and Beamforming Designs for Hybrid-RIS Assisted ISAC Systems

SNR/CRB-Constrained Joint Beamforming and Reflection Designs for RIS-ISAC Systems

Beamforming Design for Multiuser Transmission Through Reconfigurable Intelligent Surface.