Abstract:Closed Brayton cycle can efficiently convert the fission energy of the reactor into electricity, which is an ideal energy conversion system for long life, high-power and compact space reactor. In order to ensure the safe and reliable operation of turbines, compressors and generators, the space closed Brayton cycle intends to cool bearings and generators by working fluid, such as He-Xe mixture. So the cooling will inevitably affect the cycle efficiency. In this paper, three different cooling schemes for bearings and generators were proposed for the space closed Brayton cycle. They are: (1) bypassing some gas from the compressor outlet to cool bearings and generators and joining the mainstream before the reactor inlet, (2) bypassing some gas from the compressor outlet to cool bearings and generators and joining the mainstream after the reactor outlet, and (3) setting an independent cooling loop. The influence of bleeding gas flow rate on the key components was analyzed, and the three schemes were compared. The results show that the temperature difference at hot end of recuperator, molar specific power of reactor, turbine inlet temperature and molar specific work of schemes (1) and (2) decrease with increase of bleeding ratio. The scheme (3) is not effected by bleeding ratio. For a given bleeding ratio, the increasing of compression ratio will promote the space Brayton cycle efficiency of the scheme (1) and (2) at first, then the efficiency reaches its maximum value, with further increasing of compression ratio, the efficiency will reduce. But further increasing of bleeding ratio will reduce the temperature difference at hot end of recuperator, the cycle efficiency and compression ratio can not reach the maximum when the bleeding ratio increases. Therefore, there are optimal bleeding ratio, maximum cycle efficiency and corresponding compression ratio. And the maximum cycle efficiency of scheme (1) and (2) increases first and then decreases with the increase of bleeding ratio. The scheme (1) has the highest efficiency of power generation, 21.63%, because the bypass can reduce the core heat absorption and the turbine inlet temperature is the highest. The scheme (3) has the lowest efficiency which is 19.78% with the highest molar specific power which is 0.8832kJ∙mol-1 , and this scheme can reduce the core inlet temperature and the power of recuperator. The analysis provides a reference for the cooling design of the space closed Brayton cycle in the future.

Power Regulation Methods and Regulation Characteristics of the Space Reactor Direct Brayton Cycle with Helium-Xenon Working Fluid

Features of Space Reactor Brayton Cycle under Power Regulation by Control Drums

Parameters Analysis and Techno-Economic Comparison of Various ORCs and Sco2 Cycles As the Power Cycle of Lead–Bismuth Molten Nuclear Micro-Reactor

Off-design Performance and Control Characteristics of Space Reactor Closed Brayton Cycle System

Dynamic Characteristics Analysis for a Novel Double-Rotor He-Xe Closed-Brayton-Cycle Space Nuclear Power Generation System

Effect of Cooling Schemes on Performance of MW-class Space Nuclear Closed Brayton Cycle

Analysis of the Radiator Loss Safety Boundary of a Space Reactor Gas Turbine Cycle with Multiple PCU Modules

Thermodynamic Analysis of a Brayton Cycle System for a Space Power Reactor

A Study On Performance Characteristics For Closed Brayton Cycle In Inventory Regulation

Dynamic simulation of a space gas-cooled reactor power system with a closed Brayton cycle

Optimization of thermodynamic performance and mass evaluation for MW-class space nuclear reactor coupled with noble gas binary mixtures Brayton cycle

Applications of Brayton cycle technology to space power

Thermodynamic performance of an innovative space nuclear Brayton cycle with S–N 2 O

Dynamic simulation of a space lithium-cooled reactor system coupled with a He–Xe closed Brayton cycle

Investigation of Bypass Valve Positions on Performance of Closed Brayton Cycle

Comparative Study on Sequential and Simultaneous Startup Performance of Space Nuclear Power System with Multi Brayton Loops

EFFECTS OF COOLING SCHEMES ON THE PERFORMANCE OF SPACE CLOSED BRAYTON CYCLE

Multi-objective performance analysis of different SCO 2 Brayton cycles on hypersonic vehicles

Thermal‐hydraulic analysis of gas‐cooled space nuclear reactor power system with closed Brayton cycle

Effects of Mixed Inert Gases on Design of Centrifugal Compressors for Space Nuclear Reactor

Development of a Performance Analysis Model for Free-Piston Stirling Power Convertor in Space Nuclear Reactor Power Systems