Abstract:Closed Brayton cycle can efficiently convert the fission energy of the reactor into electricity, which is an ideal energy conversion system for long life, high-power and compact space reactor. In order to ensure the safe and reliable operation of turbines, compressors and generators, the space closed Brayton cycle intends to cool bearings and generators by working fluid, such as He-Xe mixture. So the cooling will inevitably affect the cycle efficiency. In this paper, three different cooling schemes for bearings and generators were proposed for the space closed Brayton cycle. They are: (1) bypassing some gas from the compressor outlet to cool bearings and generators and joining the mainstream before the reactor inlet, (2) bypassing some gas from the compressor outlet to cool bearings and generators and joining the mainstream after the reactor outlet, and (3) setting an independent cooling loop. The influence of bleeding gas flow rate on the key components was analyzed, and the three schemes were compared. The results show that the temperature difference at hot end of recuperator, molar specific power of reactor, turbine inlet temperature and molar specific work of schemes (1) and (2) decrease with increase of bleeding ratio. The scheme (3) is not effected by bleeding ratio. For a given bleeding ratio, the increasing of compression ratio will promote the space Brayton cycle efficiency of the scheme (1) and (2) at first, then the efficiency reaches its maximum value, with further increasing of compression ratio, the efficiency will reduce. But further increasing of bleeding ratio will reduce the temperature difference at hot end of recuperator, the cycle efficiency and compression ratio can not reach the maximum when the bleeding ratio increases. Therefore, there are optimal bleeding ratio, maximum cycle efficiency and corresponding compression ratio. And the maximum cycle efficiency of scheme (1) and (2) increases first and then decreases with the increase of bleeding ratio. The scheme (1) has the highest efficiency of power generation, 21.63%, because the bypass can reduce the core heat absorption and the turbine inlet temperature is the highest. The scheme (3) has the lowest efficiency which is 19.78% with the highest molar specific power which is 0.8832kJ∙mol-1 , and this scheme can reduce the core inlet temperature and the power of recuperator. The analysis provides a reference for the cooling design of the space closed Brayton cycle in the future.

Effects of Mixed Inert Gases on Design of Centrifugal Compressors for Space Nuclear Reactor

Optimization of thermodynamic performance and mass evaluation for MW-class space nuclear reactor coupled with noble gas binary mixtures Brayton cycle

Thermodynamics Properties of Binary Gas Mixtures for Brayton Space Nuclear Power System

Investigation on the thermodynamic performance and machinery mass in the N 2 O-based mixtures recompression Brayton cycle for a nuclear-powered spacecraft

Efficiency and Mass Optimization for Space Nuclear Power Systems with Closed Brayton Cycle Loops

EFFECTS OF COOLING SCHEMES ON THE PERFORMANCE OF SPACE CLOSED BRAYTON CYCLE

Thermodynamic performance of an innovative space nuclear Brayton cycle with S–N 2 O

Research on aerodynamic performance of centrifugal compressors for hydrogen-mixed natural gas

Mass optimization of a recompression supercritical nitrous oxide and helium power system for space exploration

Off-design Performance and Control Characteristics of Space Reactor Closed Brayton Cycle System

An Experimental Study on Aerodynamic Characteristics of Hypergravity Centrifugal Facility

Effect of Cooling Schemes on Performance of MW-class Space Nuclear Closed Brayton Cycle

An innovative S–CO 2 recompression Brayton system and its thermodynamic, exergoeconomic and multi-objective analyses for a nuclear spacecraft

Research on the Performance of a Passive Gas-Liquid Separator Used in Space

Thermodynamic Analysis of a Brayton Cycle System for a Space Power Reactor

Preliminary Design and Neutronic Analysis of Prismatic High Temperature Gas-cooled Space Nuclear Reactor

Advanced nuclear power engine: A brief overview of gas core reactor for space exploration

The challenges of gas-cooled reactor technology for space propulsion and the development of the JANUS space reactor concept

Study on Inherent Mechanism Between Thermodynamic Performance and Mass Evaluation of MW-class Nuclear Powered Spacecraft

Dynamic Characteristics Analysis for a Novel Double-Rotor He-Xe Closed-Brayton-Cycle Space Nuclear Power Generation System

Off-Design Performance Research of an Axial Helium Compressor for Htgr-10 Power Conversion Unit