Abstract:Studying the true triaxial deformation characteristics and progressive damage behavior of sandstone is of great significance for the stability control of roadways. Both the conventional triaxial test (CTT) and the true triaxial compression test (TTT) were conducted for sandstone to investigate its deformation characteristics and the variation laws of volume strain during the progressive damage process under different confining pressures. The conducted experiments showed that both the axial and lateral strains of the rock prior to failure under CTT conditions increased with increasing confining pressure. However, with increasing intermediate principal stress (σ2) under TTT conditions, both the axial strain, and the lateral strain (ε2) gradually decreased, and the lateral strain (ε3, expansion) first slow down and then accelerated. Moreover, the anisotropic characteristics first gradually weakened and then enhanced. The variation of the volume strain increment and the volume strain rate of rock combined with the acoustic emission activity and a three-dimensional rock theoretical model with microcrack defects were analyzed in detail. During the stable crack growth stage III, the volume strain increment and volume strain rate increased with increasing confining pressure under CTT conditions, while they decrease after the initial increase with increasing σ2 under TTT conditions. During the unstable crack growth stage IV, the volume strain increment increased sharply, while the volume strain rate gradually slowed down with increasing confining pressure under CTT conditions. The internal cracks of the rock were gradually suppressed and the lateral expansion was gradually constrained. The volume strain increment first increased followed by a decrease, and the volume strain rate gradually slowed down after a noticeable acceleration with increasing σ2 under TTT conditions. The internal micro-cracks gradually evolved from inhibition (in the planes parallel to plane 1–2 and plane 2–3) to accelerated expansion (the planes along the σ2 direction), and the lateral deformation first weakened and then strengthened.

Real-time Porosity Inversion of Rock Based on the Ultrasonic Velocity and Its Compression-Damage Coupled Model under Triaxial Compression.

Damage Evolution of Rocks Containing a Set of Cross-Joints Based on Acoustic Emission Characteristics

Analysis of Damage and Permeability Evolution of Sandstone under Compression Deformation

3D Digital Analysis of Cracking Behaviors of Rocks through 3D Reconstruction Model under Triaxial Compression

Study on the progressive fracturing in soil and rock mixture under uniaxial compression conditions by CT scanning

A dual‐porosity model incorporating uniaxial stress effect and its application in wave velocity estimation with well‐logging data

An Improved Rock Damage Characterization Method Based on the Shortest Travel Time Optimization with Active Acoustic Testing

Dynamic compressive characteristics of a green sandstone under coupled hydraulic-mechanical loading: experiments and theoretical modeling

Experimental and Numerical Investigation of Permeability Evolution with Damage of Sandstone under Triaxial Compression

Damage constitutive model and mechanical properties of jointed rock mass under hydro-mechanical coupling

Evolution and Characterization of Uniaxial Compression Damage of Coal Measure Rock

A new acoustoelastic model for velocity-hydrostatic-pressure in rocks based on general acoustoelastic theory for elastic solids

A True Triaxial Compression-Induced Microcracking Model for Evaluating Short-Term Progressive and Long-Term Creep Failures of Brittle Rock

Dynamic response and constitutive model of damaged sandstone after triaxial impact

Seepage-stress combined experiment and damage model of rock in different loading and unloading paths

A novel meso-damage constitutive model of rock under true triaxial stress with three-dimensional cracking strength, threshold and closure effect

A constitutive model for rock based on energy dissipation and transformation principles

A rock-physics model to determine the pore microstructure of cracked porous rocks

A novel anisotropic deterioration mechanical model for rock ductile–brittle failure under 3D high-stress and its application

Hydraulic Fracturing Mechanism of Rock Mass under Stress-Damage-Seepage Coupling Effect

Experimental investigation on True Triaxial Deformation and Progressive Damage Behaviour of Sandstone