Abstract:In this work, a novel halogen‐free and twisted volatile solid additive 1,4‐diphenoxybenzene (DPB) has been employed to control the morphology of the active layer in organic solar cells (OSCs). As a result, a champion power conversion efficiency (PCE) of 19.04% has been obtained in D18‐Cl:N3 binary OSCs, which is the highest value for the reported D18‐Cl:N3 OSCs to date. Recently, volatile solid additives have attracted tremendous interest in the field of organic solar cells (OSCs), which can effectively improve device efficiency without sacrificing the reproducibility and stability of the device. However, the structure of reported solid additives is onefold and its working mechanism needs to be further investigated. Herein, a novel non‐halogenated and twisted solid additive 1,4‐diphenoxybenzene (DPB) is employed to optimize the morphology of the active layer in OSCs. The properties of additive DPB, morphology of active layer, and carrier dynamics behaviors have been systematically investigated through theoretical calculations, in situ and ex situ spectroscopy, grazing‐incidence wide‐angle X‐ray scattering (GIWAXS), and grazing‐incidence small‐angle X‐ray scattering (GISAXS) measurement, as well as ultrafast spectroscopy technology. The results reveal that the twisted additive DPB selectively interacts with acceptor Y6, and thus forms optimized morphology of active layer with increased molecular crystallinity, tight molecular packing, and favorable phase separation. As a result, the optimized devices deliver a remarkable power conversion efficiency (PCE) of 19.04%, which is the highest value for the D18‐Cl:N3 system to date. These results demonstrate that non‐halogenated and twisted solid additive DPB has broad prospects in the preparation of highly efficient OSCs, providing theoretical and experimental guidance for the development of high‐performance solid additives.

Fine-tuning the Hierarchical Morphology of Multi-Component Organic Photovoltaics Via a Dual-Additive Strategy for 20.5% Efficiency

Multi‐Length‐Scale Morphologies Driven by Mixed Additives in Porphyrin‐Based Organic Photovoltaics

Optimizing Phase Separation and Vertical Distribution via Molecular Design and Ternary Strategy for Organic Solar Cells with 19.5% Efficiency

Fine Optimization of Morphology Evolution Kinetics with Binary Additives for Efficient Non-Fullerene Organic Solar Cells

Dual Additive Strategy with Quasi-Planar Heterojunction Architecture Assisted in Morphology Optimization for High-Efficiency Organic Solar Cells

Synergistic Control of Multilength-Scale Morphology and Vertical Phase Separation for High-Efficiency Organic Solar Cells

Refined molecular microstructure and optimized carrier management of multicomponent organic photovoltaics toward 19.3% certified efficiency

Achieving 20.8% Organic Solar Cells Via Additive-Assisted Layer-by-layer Fabrication with Bulk P-I-n Structure and Improved Optical Management

High-efficiency Small-Molecule Ternary Solar Cells with a Hierarchical Morphology Enabled by Synergizing Fullerene and Non-Fullerene Acceptors

Complex multilength-scale morphology in organic photovoltaics

Synergistically optimizing the optoelectronic properties and morphology using a photo-active solid additive for high-performance binary organic photovoltaics

High‐Efficiency (16.93%) Pseudo‐Planar Heterojunction Organic Solar Cells Enabled by Binary Additives Strategy

Quaternary Blends with Double Cascading Charge Transport Pathways Reaching 17.40% Efficiency in Single-Layered Organic Photovoltaics

Highly Efficient Organic Solar Cells with Improved Vertical Donor–Acceptor Compositional Gradient Via an Inverted Off‐Center Spinning Method

Single-layered organic photovoltaics with double cascading charge transport pathways: 18% efficiencies

Understanding the Mixing Phase Structure in Multi-length-scale Morphology to Arrest High-performance Photovoltaic Devices

Optimization of local orientation and vertical phase separation by adding a volatilizable solid additive to the J51:N2200 blend to improve its photovoltaic performance

Morphology Optimization by Non‐Halogenated and Twisted Volatile Solid Additive for High‐Efficiency Organic Solar Cells

Dual-Additive-Driven Morphology Optimization for Solvent-Annealing-Free All-Small-Molecule Organic Solar Cells

Revealing Morphology Evolution in Highly Efficient Bulk Heterojunction and Pseudo‐Planar Heterojunction Solar Cells by Additives Treatment

A Broad-Spectrum Solid Additive to Further Boost High-Efficiency Organic Solar Cells via Morphology Regulation