Abstract:The red mud-based ZIF-67 composite (ZIF-67/RM) was synthesized by a simple coprecipitation method and employed as a heterogeneous catalyst for activating peroxymonosulfate (PMS) to degrade ciprofloxacin (CIP). The optimum preparation conditions of ZIF-67 were as follows: Co(NO3)(2)6H(2)O dosage 10 mmol, 2-MeIM dosage 80 mmol, RM dosage 3 g, stirring time 3 h, stirring temperature 60 degrees C, stirring speed 640 rpm. Under the conditions of ZIF-67/RM dosage 0.1 g/L, PMS concentration 0.2 mM, CIP concentration 20 mg/L, and pH = 7, the maximal removal rate of CIP could reach about 82.4 % at the reaction time of 30 min. The SEM and BET characterization results showed that the rhombohedral dodecahedral ZIF-67 could fully fill the large pores of RM and form additional pore structures on the surface of RM due to its small particle size and regular shape. This phenomenon was conducive to the increase of specific surface area and the provision of more active sites for ZIF-67/RM composites. The comparative experiments revealed that Fe in RM and Co in ZIF-67 exhibited a positive synergistic catalytic effect for CIP removal. Quenching experiment, electron paramagnetic resonance (EPR) and high performance liquid chromatography (HPLC) analysis showed that Fe(IV) and Co(IV) played a leading role in the ZIF-67/RM/PMS system. At the same time, a large number of reactive oxygen species (ROS) were also produced to participate in the oxidative degradation process. The chronoamperometry experiment showed that electron transfer had little effect on CIP degradation. Furthermore, the catalytic mechanism of the PMS activated by ZIF-67/RM was proposed. DFT calculations and LC-MS analysis deduced the degradation pathway of CIP. Using the principles of quantitative structure-activity relationship (QSAR), the ecotoxicity of the degradation intermediates was analyzed. The recycling experiment, FT-IR, and XRD demonstrated that the presence of Fe-O-Co bonds prevented the leaching of Co and Fe ions, thus ZIF-67/RM exhibiting good stability. In this work, novel insights are provided into the design of composite materials based on RM and metal-organic frameworks (MOFs) as heterogeneous catalysts for the effective treatment of antibiotic wastewater through PMS activation.

Unraveling Size-Dependent Catalytic Activity of Monolithic Alginate Hydrogels for PMS Activation and Ciprofloxacin Removal

Degradation of Ciprofloxacin Using Α-Mno2 Activated Peroxymonosulfate Process: Effect of Water Constituents, Degradation Intermediates and Toxicity Evaluation

Durable fluorinated cobalt oxyhydroxide/calcium alginate hydrogels for activating peroxymonosulfate to enable nearly 100% degradation of ciprofloxacin

Fe, N-CQDs triggered the fabrication of alginate encapsulated g-C 3 N 4 hydrogel for efficient photocatalytic activation of PMS and antibiotic degradation

Hydrogel 3D Network Derived and In-Situ Magnetized Fe@C for Activation of Peroxymonosulfate to Degrade Ciprofloxacin

Edge interface microenvironment regulation of CoOOH/commercial activated carbon nano-hybrids enabling PMS activation for degrading ciprofloxacin

Preparation of Sodium Alginate Gel Microspheres Catalysts and its High Catalytic Performance for Treatment of Ciprofloxacin Wastewater

Highly Efficient Activation of Peroxymonosulfate by Cobalt Sulfide Hollow Nanospheres for Fast Ciprofloxacin Degradation

Mutual enhancement of metal coagulant and peroxymonosulfate for ciprofloxacin removing and the multiple-mode mechanisms

Ultra-fast degradation of ciprofloxacin by the peroxymonosulfate activation using a Co/Al-LDH decorated magnetic hydrochar: Structural design, catalytic performance and synergistic effects

Construction of an allophane-based molecularly imprinted polymer for the efficient removal of antibiotic from aqueous solution

Synergistic oxidation induced by underwater bubbling plasma and diatomite-CoFe2O4 activated peroxymonosulfate for the degradation of ciprofloxacin hydrochloride

Mn3O4-ZnMn2O4/SnO2 Nanocomposite Activated Peroxymonosulfate for Efficient Degradation of Ciprofloxacin in Water

Zinc-based metal–organic framework nanofibers membrane ZIF-65/PAN as efficient peroxymonosulfate activator to degrade aqueous ciprofloxacin

Facile synthesis of CoFeAl-layered double hydroxides activated by peroxymonosulfate for enhanced ciprofloxacin degradation

Adsorption kinetics, isotherms and mechanisms of three‐component covalent organic polymer/sodium alginate beads for ciprofloxacin removal from aqueous solution

Highly efficient targeted adsorption and catalytic degradation of ciprofloxacin by a novel molecularly imprinted bimetallic MOFs catalyst for persulfate activation

Efficient Degradation of Ciprofloxacin Via Peroxymonosulfate Activation over a Hierarchically Porous Cu-Ti Alloy Manufactured by 3D Printing

Assembly of SPS/MgSi Assisted by Dopamine with Excellent Removal Performance for Ciprofloxacin

Efficient Degradation of Ciprofloxacin by Peroxymonosulfate Activated Using Red Mud-Based ZIF-67 Composite As a Heterogeneous Catalyst

Peroxymonosulfate activated by composite ceramic membrane for the removal of pharmaceuticals and personal care products (PPCPs) mixture: Insights of catalytic and noncatalytic oxidation