Abstract:The red mud-based ZIF-67 composite (ZIF-67/RM) was synthesized by a simple coprecipitation method and employed as a heterogeneous catalyst for activating peroxymonosulfate (PMS) to degrade ciprofloxacin (CIP). The optimum preparation conditions of ZIF-67 were as follows: Co(NO3)(2)6H(2)O dosage 10 mmol, 2-MeIM dosage 80 mmol, RM dosage 3 g, stirring time 3 h, stirring temperature 60 degrees C, stirring speed 640 rpm. Under the conditions of ZIF-67/RM dosage 0.1 g/L, PMS concentration 0.2 mM, CIP concentration 20 mg/L, and pH = 7, the maximal removal rate of CIP could reach about 82.4 % at the reaction time of 30 min. The SEM and BET characterization results showed that the rhombohedral dodecahedral ZIF-67 could fully fill the large pores of RM and form additional pore structures on the surface of RM due to its small particle size and regular shape. This phenomenon was conducive to the increase of specific surface area and the provision of more active sites for ZIF-67/RM composites. The comparative experiments revealed that Fe in RM and Co in ZIF-67 exhibited a positive synergistic catalytic effect for CIP removal. Quenching experiment, electron paramagnetic resonance (EPR) and high performance liquid chromatography (HPLC) analysis showed that Fe(IV) and Co(IV) played a leading role in the ZIF-67/RM/PMS system. At the same time, a large number of reactive oxygen species (ROS) were also produced to participate in the oxidative degradation process. The chronoamperometry experiment showed that electron transfer had little effect on CIP degradation. Furthermore, the catalytic mechanism of the PMS activated by ZIF-67/RM was proposed. DFT calculations and LC-MS analysis deduced the degradation pathway of CIP. Using the principles of quantitative structure-activity relationship (QSAR), the ecotoxicity of the degradation intermediates was analyzed. The recycling experiment, FT-IR, and XRD demonstrated that the presence of Fe-O-Co bonds prevented the leaching of Co and Fe ions, thus ZIF-67/RM exhibiting good stability. In this work, novel insights are provided into the design of composite materials based on RM and metal-organic frameworks (MOFs) as heterogeneous catalysts for the effective treatment of antibiotic wastewater through PMS activation.

Efficient Degradation of Ciprofloxacin Via Peroxymonosulfate Activation over a Hierarchically Porous Cu-Ti Alloy Manufactured by 3D Printing

Energy-efficient electrochemical degradation of ciprofloxacin by a Ti-foam/PbO2-GN composite electrode: Electrode characteristics, parameter optimization, and reaction mechanism

Degradation of Ciprofloxacin Using Α-Mno2 Activated Peroxymonosulfate Process: Effect of Water Constituents, Degradation Intermediates and Toxicity Evaluation

Efficient Degradation of Ciprofloxacin by 3D Oxygen-Doped MoS2/polyacrylamide/graphene Oxide Composite Hydrogel Co-Catalytic Fenton Reaction

Hydrogel 3D Network Derived and In-Situ Magnetized Fe@C for Activation of Peroxymonosulfate to Degrade Ciprofloxacin

Ultra-fast degradation of ciprofloxacin by the peroxymonosulfate activation using a Co/Al-LDH decorated magnetic hydrochar: Structural design, catalytic performance and synergistic effects

3D printed hierarchically porous zero-valent copper for efficient pollutant degradation through peroxymonosulfate activation

Fabrication of Carbon-Coated Iron-Based Porous Heterogeneous Fenton Catalyst and Enhanced Degradation Performance Towards Ciprofloxacin

Highly efficient targeted adsorption and catalytic degradation of ciprofloxacin by a novel molecularly imprinted bimetallic MOFs catalyst for persulfate activation

Heterogeneous Activation of Sulfite by a Three-Dimensional Printed Hierarchically Porous Copper Catalyst for the Degradation of Tetracycline Hydrochloride in Water

Facile synthesis of CoFeAl-layered double hydroxides activated by peroxymonosulfate for enhanced ciprofloxacin degradation

Synergistic oxidation induced by underwater bubbling plasma and diatomite-CoFe2O4 activated peroxymonosulfate for the degradation of ciprofloxacin hydrochloride

Activation of Peroxymonosulfate by Magnetic Co-Fe/SiO2 Layered Catalyst Derived from Iron Sludge for Ciprofloxacin Degradation

Efficient Degradation of Ciprofloxacin in Water over Copper-Loaded Biochar Using an Enhanced Non-Radical Pathway

Mn3O4-ZnMn2O4/SnO2 Nanocomposite Activated Peroxymonosulfate for Efficient Degradation of Ciprofloxacin in Water

Degradation of ciprofloxacin by magnetic CuS/MnFe 2 O 4 catalysts efficiently activated peroxymonosulfate

Iron Sludge-Derived Magnetic Fe0/Fe3C Catalyst for Oxidation of Ciprofloxacin Via Peroxymonosulfate Activation

Durable fluorinated cobalt oxyhydroxide/calcium alginate hydrogels for activating peroxymonosulfate to enable nearly 100% degradation of ciprofloxacin

Palladium-Copper Alloy Nanoparticles Supported on Carbon Nitride Nanosheets As a Photocatalyst for Degradation of Ciprofloxacin

Catalytic Degradation of Ciprofloxacin by Magnetic CuS/Fe2O3/Mn2O3 Nanocomposite Activated Peroxymonosulfate: Influence Factors, Degradation Pathways and Reaction Mechanism

Efficient Degradation of Ciprofloxacin by Peroxymonosulfate Activated Using Red Mud-Based ZIF-67 Composite As a Heterogeneous Catalyst