Abstract:Powder metallurgy (PM) of titanium is a potentially cost-effective alternative to conventional wrought titanium. This article examines both traditional and emerging technologies, including the production of powder, and the sintering, microstructure, and mechanical properties of PM Ti. The production methods of powder are classified into two categories: (1) powder that is produced as the product of extractive metallurgy processes, and (2) powder that is made from Ti sponge, ingot, mill products, or scrap. A new hydrogen-assisted magnesium reduction (HAMR) process is also discussed. The mechanical properties of Ti-6Al-4V produced using various PM processes are analyzed based on their dependence on unique microstructural features, oxygen content, porosity, and grain size. In particular, the fatigue properties of PM Ti-6Al-4V are examined as functions of microstructure. A hydrogen-enabled approach for microstructural engineering that can be used to produce PM Ti with wrought-like microstructure and properties is also presented. Abbreviations: AM: additive manufacturing; ARC: Albany Research Center; BE: blended elemental; BUS: broken-up structure; CCGA: close-coupled gas atomisation; CHIP: CIP-sinter-HIP; CIP: cold isostatic pressing; CP-Ti: commercially pure Ti; DRTS: direct reduction of Ti-slag; CSIR: Council for Scientific and Industrial Research (South Africa); CSIRO: Commonwealth Scientific and Industrial Research Organization (Australia); EIGA: electrode induction gas atomisation; EMR: electronically mediated reduction; FFC: Fray, Farthing, and Chen; GA: gas atomisation; GIF: gaseous isostatic forging; GSD: granulation-sintering-deoxygenation; HAMR: hydrogen-assisted magnesium reduction; HDH: hydride–dehydride; HIP: hot isostatic pressing; HSPT: hydrogen sintering and phase transformation; MA: master alloy; MER: Materials & Electrochemical Research Corporation (US); MHR: metal hydride reduction; MIM: metal injection molding; OM: optical microscope; OS: Ono and Suzuki; PA: pre-alloyed; P/C: performance to cost ratio; PIF: pneumatic isostatic forging; PM: powder metallurgy; PREP: plasma rotating electrode process; PP: post-processing; PS: press and sinter; QIT: Quebec Iron & Titane, Inc. (Canada); SEM: scanning electron microscope; SPS: spark plasma sintering; SOM: solid oxide membrane; THP: thermohydrogen processing; TMP: thermomechanical processing; UFG: ultrafine grain; UGS: upgraded titanium slag; UTS: ultimate tensile strength; USTB: University of Science and Technology Beijing (China); VA: vacuum atomisation; VHP: vacuum hot pressing; WP: wrought process; YS: yield strength

Effects of Feedstock Powder on Wear, Corrosion, and Tribocorrosion Performances of Ti-6.5Al-2Zr-1Mo-1V Fabricated by Additive Manufacturing

Cost-affordable Ti-6Al-4V for Additive Manufacturing: Powder Modification, Compositional Modulation and Laser In-Situ Alloying

Effect of surface oxidation on wear and tribocorrosion behavior of forged and selective laser melting-based TC4 alloys

Comparison on the Electrochemical Corrosion Behavior of Ti6Al4V Alloys Fabricated by Laser Powder Bed Fusion and Casting

Synergistic Improvement in Ductility and Hot Nitric Acid Corrosion Resistance of LPBF Ti-6Al-4V Alloy via Hot Isostatic Pressing

Effective Ti-6Al-4V Powder Recycling in LPBF Additive Manufacturing Considering Powder History

Superior Wear Resistance in EBM-Processed TC4 Alloy Compared with SLM and Forged Samples

Effect of Particle Size Distribution on the Printing Quality and Tensile Properties of Ti-6Al-4V Alloy Produced by LPBF Process

Corrosion Resistance of Selective Laser Melted Ti6Al4V3Cu Alloy Produced Using Pre-Alloyed and Mixed Powder

Influence of the physicochemical properties of reusable powders on the mechanical properties of Ti6Al4V manufactured via laser powder bed fusion additive manufacturing

Fabrication of large cross-section Ti–6Al–4V alloy using EBS-modified POM-based feedstock

Anisotropy of wear and tribocorrosion properties of L-PBF Ti6Al4V

Birth cohort analysis of prevalence of cigarette smoking among Hispanics in the United States.

Microstructure, mechanical properties and corrosion resistance of low-cost Ti–Al–Cr–Fe alloys processed via powder metallurgy

Powder metallurgy of titanium – past, present, and future

TiO 2 -hBN nanocomposite coating with excellent wear and corrosion resistance on Ti6Al4V alloy prepared by plasma electrolytic oxidation

Innovative Fabrication Design for In Situ Martensite Decomposition and Enhanced Mechanical Properties in Laser Powder Bed Fused Ti6Al4V Alloy

Electrochemical and passive behaviors of Ti-Fe-B alloy manufactured via casting, forging and additive manufacturing

Effect of lithium anti-ablation and grain refinement introduced by TiC nanoparticles in LPBF Al–Li alloy

Enhanced protective nanoparticle-modified MgAl-LDHs coatings on titanium alloy

Effect of Radiofrequency Plasma Spheroidization Treatment on the Laser Directed Energy Deposited Properties of Low-Cost Hydrogenated-Dehydrogenated Titanium Powder