Abstract:In this paper, we incorporate the dynamical process of frequency control in modeling cascading failure and assessing the robustness of power systems with a high level of penetration of renewable energy sources. Triggered by an initial failure, a power system may be decomposed into multiple subnetworks, where the power imbalance between generation and load can be induced. Frequency control functions including primary, secondary, and emergency frequency control are employed to reduce the frequency deviation to balance the generated power and consumed power. In our simulation model, the power flow process maintains power balance in the steady-state, and a power redistribution process is triggered each time the network changes with the next failure event. The process reiterates until no overloaded component is generated. In the dynamical frequency control process, we differentiate the traditional synchronous machine-based generators from the renewable energy sources that are integrated with power electronic devices and exhibit low inertia. As power electronics integrated renewable sources do not contribute to frequency response, they can be disconnected from the grid due to unexpected frequency deviation. Applying to the IEEE 39-bus power test system, our model captures the salient frequency response process in a failure propagation chain similar to historical scenarios. The frequency deviation is found to increase with the percentage of integrated renewable energy sources, intensifying the cascading failure events. Furthermore, using the IEEE 300-bus test system, we show an increased risk of power outage as the level of penetration of renewable sources increases in the absence of an adequate protective measure.

Power System Damage Assessment Considering Cascading Failures under the E1 HEMP

Vulnerability Analysis of Electrical Cyber Physical Systems Using a Simulation Platform.

Breakdown Characteristics and Damage Mechanism of Typical Defects in Oil-paper Insulation under HEMP

Measuring and Analyzing Effects of HEMP Simulation on Synthetic Power Grids

Calculation and Assessment for HEMP Response of Overhead Transmission Line

Study on Control Strategy of Cascading Failure for Power System with Multi-send HVDC and Large-scale wind farm

Numerical Simulation of the Intermediate-Time High-Altitude Electromagnetic Pulse

Development of Bayesian Component Failure Models in E1 HEMP Grid Analysis

Analysis and improvement of transformer overvoltage protection under high altitude electromagnetic pulse

Impact of Characteristic Path Length on Cascading Failure of Power Grid

Assessment of Power System Cascading Failure under the Background of Direct Power Purchase by Large Consumers

Strong Electromagnetic Pulse Interference Loading Method on Electrical Equipment under Operation State

Analysis and Simulation Research of Cascading Faults in AC/DC Hybrid Grid

Performance and reliability of electrical power grids under cascading failures

The Statistical Characteristics Analysis for Overvoltage of Elevated Transmission Line under High-Altitude Electromagnetic Pulse Based on Rosenblatt Transformation and Polynomial Chaos Expansion

Effects of High Level of Penetration of Renewable Energy Sources on Cascading Failure of Modern Power Systems

Eletromagnetic Interference of Transmisssion Line in HEMP Environment

Vulnerability Assessment for Cascading Failures in Electric Power Systems

Composite Power System Risk Assessment and Weak Links Identification Considering Cascading Failures

Impact of Information Network Damage on Overload-based Cascading Failures of Power Grid

Ultra-wide Band Modeling and Over-voltage Analysis of High Altitude Nuclear Electromagnetic Pulse on Transformer