Abstract:The management of municipal and industrial organic solid wastes has become one of the most critical environmental problems in modern societies. Nowadays, commonly used management techniques are incineration, composting, and landfilling, with the former one being the most common for hazardous organic wastes. An alternative eco-friendly method that offers a sustainable and economically viable solution for hazardous wastes management is fast pyrolysis, being one of the most important thermochemical processes in the petrochemical and biomass valorization industry. The objective of this work was to study the application of fast pyrolysis for the valorization of three types of wastes, i.e., petroleum-based sludges and sediments, residual paints left on used/scrap metal packaging, and creosote-treated wood waste, towards high-added-value fuels, chemicals, and (bio)char. Fast pyrolysis experiments were performed on a lab-scale fixed-bed reactor for the determination of product yields, i.e., pyrolysis (bio)oil, gases, and solids (char). In addition, the composition of (bio)oil was also determined by Py/GC-MS tests. The thermal pyrolysis oil from the petroleum sludge was only 15.8 wt.% due to the remarkably high content of ash (74 wt.%) of this type of waste, in contrast to the treated wood and the residual paints (also containing 30 wt.% inorganics), which provided 46.9 wt.% and 35 wt.% pyrolysis oil, respectively. The gaseous products ranged from ~7.9 wt.% (sludge) to 14.7 (wood) and 19.2 wt.% (paints), while the respective solids (ash, char, reaction coke) values were 75.1, 35, and 36.9 wt.%. The thermal (non-catalytic) pyrolysis of residual paint contained relatively high concentrations of short acrylic aliphatic ester (i.e., n-butyl methacrylate), being valuable monomers in the polymer industry. The use of an acidic zeolitic catalyst (ZSM-5) for the in situ upgrading of the pyrolysis vapors induced changes on the product yields (decreased oil due to cracking reactions and increased gases and char/coke), but mostly on the pyrolysis oil composition. The main effect of the ZSM-5 zeolite catalyst was that, for all three organic wastes, the catalytic pyrolysis oils were enriched in the value-added mono-aromatics (BTX), especially in the case of the treated wood waste and residual paints. The non-condensable gases were mostly consisting of CO, CO2, and different amounts of C1–C4 hydrocarbons, depending on initial feed and use or not of the catalyst that increased the production of ethylene and propylene.

The TGAFTIR-GC/MS Characterizations of Pyrolysis of Polyurethane Paint Slags

TG-FTIR Characterization of Pyrolysis of Waste Mixtures of Paint and Tar Slag.

Thermogravimetric Analysis and Pyrolysis of Waste Mixtures of Paint and Tar Slag

Paint Slag Pyrolysis Characteristics and Techniques

The Thermal Treatment Properties of the Tars from Sewage Sludge Gasification

Effect of Wastewater Treatment Processes on the Pyrolysis Properties of the Pyrolysis Tars from Sewage Sludges

Study on Pyrolysis Behavior of Municipal Sludge Based on TG-FTIR-MS

Pyrolytic Behavior of Waste Extruded Polystyrene and Rigid Polyurethane by Multi Kinetics Methods and Py-GC/MS

Pyrolysis Behaviors of Oil Sludge Based on TG/FTIR and PY-GC/MS

The Exhaust Gas Analysis of Dye Residue Pyrolysis by TG-FTIR

Hazardous Air Pollutant Formation from Pyrolysis of Typical Chinese Casting Materials.

Valorization of Hazardous Organic Solid Wastes towards Fuels and Chemicals via Fast (Catalytic) Pyrolysis

Formation of PAHs during the pyrolysis of dry sewage sludge

Emission characteristics of nitrogen and sulfur containing pollutants during the pyrolysis of oily sludge with and without catalysis

Influence of Interactions among Polymeric Components of Automobile Shredder Residue on the Pyrolysis Temperature and Characterization of Pyrolytic Products

Actionable insights into hazard mitigation of typical 3D printing waste via pyrolysis

Study on Pyrolysis and Combustion of Different Sewage Sludges by TGA-FTIR Analysis

Study on the Mechanisms of Hazardous Air Pollutant Emissions from Green Sand Casting

Characteristics, kinetics, infrared analysis and process optimization of co-pyrolysis of waste tires and oily sludge

Pyrolysis Behaviors of Oilfield Sludge Based on Py-GC/MS and DAEM Kinetics Analysis

TG-FTIR study of pyrolysis products evolving from dyestuff production waste