Abstract:Thermogravimetric behavior of simulated medical waste was studied in the atmosphere of nitrogen and air at different heating rates by thermogravimetric analysis and differential thermal analysis (TG-DTA), and the influence on the thermogravimetric behavior of simulated medical waste by the atmosphere and heating rate was also discussed. The results indicate that the initial separating temperature of the volatile organic matter ( T(s)) moves toward higher temperature and the peak value of the weight loss velocity (DTGmax) has a remarkable increase with the increasing heating rate when simulated medical waste is heated at these two atmospheres. There are two weight loss peaks when the experimental material is pyrolyzed at the atmosphere of nitrogen and the corresponding weight loss rate is about 31% and 59% . There are three weight loss peaks at the atmosphere of air and the corresponding anterior two weight loss rate is about 44% - 59% and 31% - 46%. At the same time, qualitative analysis of evolved gases under different conditions was analyzed by the coupled simultaneous fourier transform infrared spectroscopy (FTIR). In addition, quantitative analysis of CO, CO2, H2O and CH4 was conducted. Experimental results show that the main thermogravimetric stages of simulated medical waste in the atmosphere of nitrogen and air have the similar products, and the typical absorbed peaks of CO2, CO, alkanes, aldehydes, carbonyl acids, alcohols and alkenes were detected. And result shows that the heating rate and atmosphere have an effect on the yield of CO, CO2, H2O and CH4. In the main stages of the process, the curves of water content changing along with the heating time show downward peaks, which count for the participation of water during the reaction.

The Exhaust Gas Analysis of Dye Residue Pyrolysis by TG-FTIR

TG-FTIR study of pyrolysis products evolving from dyestuff production waste

Pyrolysis Product Evolution Characteristics of Bio-Ferment Residue Using Thermogravimetric Analysis, Fourier Transform Infrared Spectroscopy, and Mass Spectrometry

Analysis on low-temperature polyethylene pyrolysis and gasification in different atmospheres

The Thermal Treatment Properties of the Tars from Sewage Sludge Gasification

Thermal Characteristics, PCDD/F Formation, and PCDD/F Inhibition in the Incineration of Distillation Residue from Chemical and Coal Industries

Effect of Wastewater Treatment Processes on the Pyrolysis Properties of the Pyrolysis Tars from Sewage Sludges

Thermal behavior characteristics of Adhesive residue.

Study on pyrolysis of typical medical waste materials by using TG-FTIR analysis

PCDD/Fs in Wet Sewage Sludge Pyrolysis Using Conventional and Microwave Heating

Comprehensive Estimation of Combustion Behavior and Thermochemical Structure Evolution of Four Typical Industrial Polymeric Wastes

Thermogravimetric Coupled with Fourier Transform Infrared Analysis Study on Thermal Treatment of Monopotassium Phosphate Residue

An Experimental Study on Pyrolysis Gas Characteristics of Typical Components of Medical Waste

Study on Pyrolysis and Combustion of Different Sewage Sludges by TGA-FTIR Analysis

TG-FTIR study on urea-formaldehyde resin residue during pyrolysis and combustion.

Analysis of the Pyrolysis of Solid Recovered Fuel and Its Sorted Components by using TG-FTIR and DAEM

TG-FTIR Analysis of Sewage Sludge: Influence of Moisture and Atmosphere

Volatilization behavior of fluorine in fluoroborate residue during pyrolysis.

Distribution of gasification products and emission of heavy metals and dioxins from municipal solid waste at the low temperature pyrolysis stage

[Study on Thermogravimetric Characteristics of Simulated Medical Waste by Using TG-DTA-FTIR Analysis].

Chemical Synthesis Residual Pyrolysis and Combustion: Kinetics and Evolved Gases Investigated by TG-FTIR