Abstract:Metastable (Ti,Al)N thin films with face-centered cubic (fcc) structure are widely applied to protect tools and components used in the machining industry for their high hardness and exceptional thermal stability. Alloying is a simple but powerful strategy to further improve the performance of (Ti,Al)N thin films. Here, the combination of experiments and ab initio calculations allowed us to further improve the mechanical properties, thermal stability, and oxidation resistance of arc-evaporated (Ti,Al)N films through the addition of Nb and Ta. The developed Ti 0.40 Al 0.53 Nb 0.07 N, Ti 0.34 Al 0.52 Nb 0.14 N, Ti 0.40 Al 0.53 Ta 0.07 N, and Ti 0.34 Al 0.50 Ta 0.16 N thin films show a single-phase fcc structure like Ti 0.46 Al 0.54 N. While the hardness ( H ) of as-deposited (Ti,Al,Nb)N thin films is similar to that of Ti 0.46 Al 0.54 N (30.1 ± 0.4 GPa), it increases to 33.2 ± 0.7 and 34.1 ± 1.1 GPa by alloying with 7 and 16 at.% Ta (metal fraction), respectively. Both alloying elements allow to retard the spinodal decomposition of (Ti,Al)N, as suggested by X-ray diffraction of vacuum-annealed samples. The (Ti,Al)N and (Ti,Al,Nb)N samples exhibit the onset of wurtzite (w-) AlN formation at ~1050 °C, which is postponed to ~1200 °C for the (Ti,Al,Ta)N thin films. Ab initio calculations suggest that age hardening of (Ti,Al)N is improved by Nb and Ta, with Nb being more effective than Ta. This is verified by experiments showing that Ti 0.40 Al 0.53 Nb 0.07 N (Ti 0.34 Al 0.52 Nb 0.14 N) and Ti 0.40 Al 0.53 Ta 0.07 N (Ti 0.34 Al 0.50 Ta 0.16 N) experience an increase of H to 34.7 ± 0.5 GPa (36.7 ± 0.7 GPa) and 35.8 ± 1.0 GPa (37.0 ± 1.1 GPa) when annealed at 1000 °C, compared to the 32.4 ± 0.7 GPa of Ti 0.46 Al 0.54 N annealed at 900 °C. The relative H increase is thus higher for (Ti,Al,Nb)N than for (Ti,Al,Ta)N. Furthermore, Nb and Ta also improve the oxidation resistance of (Ti,Al)N with Ta being more effective than Nb. Based on these results we can conclude that both Nb and Ta elements improve hardness, thermal stability, and oxidation resistance of (Ti,Al)N, with Nb providing more relative hardness gain but Ta providing higher absolute values.

Influence of Ta and Y Co-Alloying on the Structure, Mechanical, and Thermal Properties of TiAlN Coatings

Structure, mechanical and thermal properties of Ti1−x−y−zAlxTayBzN coatings

Influence of Si and Ta mixed doping on the structure, mechanical and thermal properties of Ti Al N coatings

Origin of High Temperature Oxidation Resistance of Ti-Al-Ta-N Coatings

Structural and High-Temperature Oxidation Performance of Al-Co-Y Co-deposited Coatings on a TiAl-Nb Alloy at Low Temperatures

Thermal and Thermo-Mechanical Properties of Ti–Al–N and Cr–Al–N Coatings

Effect of CrN Addition on the Structure, Mechanical and Thermal Properties of Ti-Al-N Coating

Structural, Mechanical, and Thermal Properties of the TiAlTaN/TiAlBN Multilayer

Role of nitrogen and tantalum in the high-temperature oxidation behavior of AlCoCr 0.5 NiTa x Ti(N) alloys synthesized by laser in situ synthesis

Ab initio supported development of Nb- and Ta-alloyed (Ti,Al)N thin films with improved thermal stability

Effect of Ti and Ta content on the oxidation resistance of Co-Ni-based superalloys

Microstructure and Oxidation Behaviour of Plasma-Sprayed NiCoCrAlY Coatings with and Without Ta on Ti44Al6Nb1Cr Alloys

Microstructure, Oxidation Behavior and Adhesion of a CoNiCrAlTaY Coating Deposited on a High Nb–TiAl Alloy by Plasma Surface Metallizing Technique

Effect of Si-addition on structure and thermal stability of Ti-Al-N coatings

Effect of Y Content on Precipitation Behavior, Oxidation and Mechanical Properties of As-Cast High-Temperature Titanium Alloys

Effects of Ti and Y Addition on the Scale Spalling Resistance of CoNiCrAl Alloys

Microstructural and Performance Analysis of (TiAl)95−xCu5Nix Coatings Prepared via Laser Surface Cladding on Ti–6Al–4V Substrates

Influence of Al2O3 particles on the tribological properties of CoCrAlYTa coating produced by laser-induction hybrid cladding

Effect of C/N incorporation on structural and crystallographic properties of TaNbZr coatings deposited by double-glow plasma surface alloying on Ti-alloy substrate

Effect of Ta on Selective Oxidation Behavior and Oxide Film Adhesion of Alumina-Forming Austenitic Alloys

Effect of Y on Microstructure and Properties of Al0.8FeCrCoNiCu0.5 High Entropy Alloy Coating on 5083 Aluminum by Laser Cladding