Abstract:In bridge structure monitoring and evaluation, deformation data serve as a crucial basis for assessing structural conditions. Different from discrete monitoring points, spatially continuous deformation modes provide a comprehensive understanding of deformation and potential information. Terrestrial laser scanning (TLS) is a three-dimensional deformation monitoring technique that has gained wide attention in recent years, demonstrating its potential in capturing structural deformation models. In this study, a TLS-based bridge deformation mode monitoring method is proposed, and a deformation mode calculation method combining sliding windows and surface fitting is developed, which is called the SWSF method for short. On the basis of the general characteristics of bridge structures, a deformation error model is established for the SWSF method, with a detailed quantitative analysis of each error component. The analysis results show that the deformation monitoring error of the SWSF method consists of four parts, which are related to the selection of the fitting function, the density of point clouds, the noise of point clouds, and the registration accuracy of point clouds. The error caused by point cloud noise is the main error component. Under the condition that the noise level of point clouds is determined, the calculation error of the SWSF method can be significantly reduced by increasing the number of points of point clouds in the sliding window. Then, deformation testing experiments were conducted under different measurement distances, proving that the proposed SWSF method can achieve a deformation monitoring accuracy of up to 0.1 mm. Finally, the proposed deformation mode monitoring method based on TLS and SWSF was tested on a railway bridge with a span of 65 m. The test results showed that in comparison with the commonly used total station method, the proposed method does not require any preset reflective markers, thereby improving the deformation monitoring accuracy from millimeter level to submillimeter level and transforming the discrete measurement point data form into spatially continuous deformation modes. Overall, this study introduces a new method for accurate deformation monitoring of bridges, demonstrating the significant potential for its application in health monitoring and damage diagnosis of bridge structures.

Automated Measurement Method for Cable Shapes Based on Laser Scanners and Cameras

Automated Measurement of Cable Shape in Super-Long Span Suspension Bridges

Automatic Geometric Digital Twin of Box Girder Bridge Using a Laser-Scanned Point Cloud

Rapid measurement method for cable tension of cable‐stayed bridges using terrestrial laser scanning

Spatial Shape Identification of Long-Span Suspension Bridges Using 3d Laser Scanning Technology

Cable-stayed bridge all-round morphology identification based on 3D point cloud model

Measurement of stay cable model deformation of sloping stay bridge using digital camera

Geometrical Morphology and Deformation Measurement of Long-Span Suspension Bridge Based on Terrestrial Laser Scanning

A Vision-Based System for Dynamic Displacement Measurement of Long-Span Bridges: Algorithm and Verification

Research on Long-span Bridge Point Cloud Morphology Identification

Geometric shape measurement and its application in bridge construction based on UAV and terrestrial laser scanner

Vision-based multi-point real-time monitoring of dynamic displacement of large-span cable-stayed bridges

An advanced vision-based deformation measurement method and application on a long-span cable-stayed bridge

Computer vision-based real-time continuous monitoring of the pose for large-span bridge cable lifting structures

Point Cloud Registration Methods for Long-Span Bridge Spatial Deformation Monitoring Using Terrestrial Laser Scanning

3D laser scanning for predicting the alignment of large-span segmental precast assembled concrete cable-stayed bridges

High-Precision Monitoring Method for Bridge Deformation Measurement and Error analysis Based on Terrestrial Laser Scanning

Structure-aware 3D reconstruction for cable-stayed bridges: A learning-based method

Semi-automated Generation of Geometric Digital Twin for Bridge Based on Terrestrial Laser Scanning Data

Efficient In-Site Laser Scanning Scheme with Adaptive Angular Resolution for Long-Span Bridge Geometry Measurement

UAV-based Bridge Geometric Shape Measurement Using Automatic Bridge Component Detection and Distributed Multi-View Reconstruction