Abstract:In structural deformation monitoring, traditional methods are mainly based on the deformation data measured at several individual points. As a result, only the discrete deformation, not the overall one, can be obtained, which hinders the researcher from a better and all-round understanding on the structural behavior. At the same time, the surrounding area around the measuring structure is usually complicated, which notably escalates the difficulty in accessing the deformation data. In dealing with the said issues, a digital image-based method is proposed for the overall structural deformation monitoring, utilizing the image perspective transformation and edge detection. Due to the limitation on camera sites, the lens is usually not orthogonal to the measuring structure. As a result, the obtained image cannot be used to extract the deformation data directly. Thus, the perspective transformation algorithm is used to obtain the orthogonal projection image of the test beam under the condition of inclined photography, which enables the direct extraction of deformation data from the original image. Meanwhile, edge detection operators are used to detect the edge of structure’s orthogonal projection image, to further characterize the key feature of structural deformation. Using the operator, the complete deformation data of structural edge are obtained by locating and calibrating the edge pixels. Based on the above, a series of load tests has been carried out using a steel–concrete composite beam to validate the proposed method, with the implementation of traditional dial deformation gauges. It has been found that the extracted edge lines have an obvious sawtooth effect due to the illumination environment. The sawtooth effect makes the extracted edge lines slightly fluctuate around the actual contour of the structure. On this end, the fitting method is applied to minimize the fluctuation and obtain the linear approximation of the actual deflection curve. The deformation data obtained by the proposed method have been compared with the one measured by the dial meters, indicating that the measurement error of the proposed method is less than 5%. However, since the overall deformation data are continuously measured by the proposed method, it can better reflect the overall deformation of the structure, and moreover the structural health state, when compared with the traditional “point” measurements.

Three-dimensional Deformation Monitoring of Internal Nodes of Large-Span Suspended Dome Structure Using Videogrammetry under Camera Instability

High-speed Videogrammetric Measurement of the Displacement of Suspendome Structure Node

Distributed High-Speed Videogrammetry for Real-Time 3D Displacement Monitoring of Large Structure on Shaking Table

Development of a Robust High-Speed Videogrammetric Technique for the Measurement of Large-Scale Shaking Table Tests

Measurement of stay cable model deformation of sloping stay bridge using digital camera

Recent Advances of Videometrics for Large-Scale Structure Deformation Monitoring

Monitoring a Progressive Collapse Test of a Spherical Lattice Shell Using High‐speed Videogrammetry

Full-field Deformation Measurement of Structural Nodes Based on Panoramic Camera and Deep Learning-Based Tracking Method

Videogrammetric Technique for Three-Dimensional Structural Progressive Collapse Measurement

3D Deformation Monitor with a Distributed High-Speed Videogrammetry System Based on Shaking Table Experiment

High-speed Videogrammetric Measurement of the Deformation of Shaking Table Multi-Layer Structures

Advances in High- Accuracy Three- Dimensional Dynamic Deformation Measurement and Its Applications for Large Structures

Videometrics Methods and Applications of Static and Dynamic Deformation of Large-Scale Structures(Invited)

Monitoring Dynamic Deformation of Building Using Unmanned Aerial Vehicle

Multicamera System Extrinsic Stability Analysis and Large-Span Truss String Structure Displacement Measurement.

Deformation Monitoring of a Super-Tall Structure Using Real-Time Strain Data

High-speed multi-camera 3D DIC measurement of the deformation of cassette structure with large shaking table

Noncontact displacement monitoring of stay cables using videogrammetric method

An Overall Deformation Monitoring Method of Structure Based on Tracking Deformation Contour

Tensile Construction Monitoring and Progressive Collapse Test of Suspen-Dome Structure Based on UAV-Assisted Close-Range Photogrammetry and Multi-Camera Stereo-Digital Image Correlation

A Vision Monitoring System for Multipoint Deflection of Large‐span Bridge Based on Camera Networking