Abstract:Based on a substantial number of seabed sediment samples and corresponding acoustic characteristic and physical property test data collected in the continental shelf area of the northwestern South China Sea, this study employed a sound speed ratio correction model to analyze the correlation between the sound speed ratio of seabed sediments and parameters such as porosity, density, mean grain size, and water content. This study resulted in the development of both single-parameter and double-parameter empirical formulas for the sound speed ratio of seabed sediments in this marine region. The determination coefficients (r 2 ) for the single-parameter empirical formulas based on physical properties, excluding the mean grain size (r 2 ≤ 0.75), were all above 0.78, indicating a strong correlation. Additionally, the fitting curve at 100 kHz was slightly greater than that at 50 kHz, consistent with the acoustic dispersion characteristics of sediments. To assess the applicability of the empirical formulas to different maritime areas, the formulas derived from the South Yellow Sea, East China Sea, and South China Sea were compared with those of the study area. The results indicated that the empirical formulas for the sound speed ratio established in this study have general applicability, especially for sediments with low porosity, high density, and low mean grain size. In addition, the determination coefficient of the dual-parameter empirical formula for the sound speed ratio–porosity–mean grain size is superior to that of the single-parameter empirical formula for the sound speed ratio–mean grain size. Through comparative studies with other marine areas, it was found that there are certain differences in the relationships between porosity and mean grain size established in different marine areas. Therefore, based on the rough sphere model, this study transforms the GS model into a single-parameter model built on either porosity or mean grain size. The error analysis results indicate that the single-parameter GS model has a smaller error than the measured data. However, the GS model controlled by a single parameter performs poorly compared to the predicted curves of the sound speed ratio–porosity and the sound speed ratio–mean grain size fitted in this study. This discrepancy may be attributed to the fact that the input parameters of the GS model are reference values, emphasizing the need for further research to determine suitable input parameters for the GS model in this marine area.

Sound Speed Prediction Equations for Seafloor Sediments in Offshore Area Southeast of Hainan Island

Correlation between the sound speed ratio and physical properties of seafloor sediments in the northwestern shelf of the south China sea

Relationships between the sound speed ratio and physical properties of surface sediments in the South Yellow Sea

Correlation between acoustic velocity and physical parameters of sea floor sediments: a case study of the northern South China Sea

Study on Shallow S-wave Velocity Structure of Xiamen Island with the Frequency-Bessel Transform Method from Seismic Ambient Noise

Empirical Equations of P-Wave Velocity in the Shallow and Semi-Deep Sea Sediments from the South China Sea

Sound speed prediction of seafloor sediments in the South Yellow Sea based on BP-AdaBoost model

Physical-mechanical properties of sediments and their correlation with near seafloor seismic amplitude in the Liwan canyon area, northern South China Sea

Analysis on acoustic velocity characteristics of sediments in the northern slope of the South China Sea

Physical properties and in situ geoacoustic properties of seafloor surface sediments in the East China Sea

Shear Wave Speed Dispersion Characteristics of Seafloor Sediments in the Northern South China Sea

Estimation of Sound Speed Profile from MODAS and Its Effect on Sound Propagation in the South China Sea

Investigation and Use of Surface-wave Characteristics for Near-surface Applications

Prediction of the shear wave speed of seafloor sediments in the northern South China Sea based on an XGBoost algorithm

Hierarchical Construction of Sound Speed Profile based on Argo and Sea Surface Data

Performance of single empirical orthogonal function regression method in global sound speed profile inversion and sound field prediction

A Multi-Spatial Scale Ocean Sound Speed Prediction Method Based on Deep Learning

Sound Velocity Profiles Time Series Prediction Method Based on EMD-NARX Model

On-deck vs. laboratory analyses of the sound velocity of sediments from the Huanghai and Bohai seas

Investigation of geoacoustic parameters of fine-grained sediment in the South China Sea using sequential inversion

Correlation Analysis and Prediction of the Physical and Mechanical Properties of Coastal Soft Soil in the Jiangdong New District, Haikou, China