Abstract:Based on a substantial number of seabed sediment samples and corresponding acoustic characteristic and physical property test data collected in the continental shelf area of the northwestern South China Sea, this study employed a sound speed ratio correction model to analyze the correlation between the sound speed ratio of seabed sediments and parameters such as porosity, density, mean grain size, and water content. This study resulted in the development of both single-parameter and double-parameter empirical formulas for the sound speed ratio of seabed sediments in this marine region. The determination coefficients (r 2 ) for the single-parameter empirical formulas based on physical properties, excluding the mean grain size (r 2 ≤ 0.75), were all above 0.78, indicating a strong correlation. Additionally, the fitting curve at 100 kHz was slightly greater than that at 50 kHz, consistent with the acoustic dispersion characteristics of sediments. To assess the applicability of the empirical formulas to different maritime areas, the formulas derived from the South Yellow Sea, East China Sea, and South China Sea were compared with those of the study area. The results indicated that the empirical formulas for the sound speed ratio established in this study have general applicability, especially for sediments with low porosity, high density, and low mean grain size. In addition, the determination coefficient of the dual-parameter empirical formula for the sound speed ratio–porosity–mean grain size is superior to that of the single-parameter empirical formula for the sound speed ratio–mean grain size. Through comparative studies with other marine areas, it was found that there are certain differences in the relationships between porosity and mean grain size established in different marine areas. Therefore, based on the rough sphere model, this study transforms the GS model into a single-parameter model built on either porosity or mean grain size. The error analysis results indicate that the single-parameter GS model has a smaller error than the measured data. However, the GS model controlled by a single parameter performs poorly compared to the predicted curves of the sound speed ratio–porosity and the sound speed ratio–mean grain size fitted in this study. This discrepancy may be attributed to the fact that the input parameters of the GS model are reference values, emphasizing the need for further research to determine suitable input parameters for the GS model in this marine area.

Prediction of the shear wave speed of seafloor sediments in the northern South China Sea based on an XGBoost algorithm

Sound speed prediction of seafloor sediments in the South Yellow Sea based on BP-AdaBoost model

Interpreting XGBoost predictions for shear-wave velocity using SHAP: Insights into gas hydrate morphology and saturation

Estimation of sound speed profiles based on remote sensing parameters using a scalable end-to-end tree boosting model

Improved Gravity-Geologic Method Reliably Removing the Long-Wavelength Gravity Effect of Regional Seafloor Topography: A Case of Bathymetric Prediction in the South China Sea

Efficient Seismic Stability Analysis of Embankment Slopes Subjected to Water Level Changes Using Gradient Boosting Algorithms

Predicting significant wave height in the South China Sea using the SAC-ConvLSTM model

Predicting Lake Erie Wave Heights using XGBoost

Prediction of undrained shear strength using extreme gradient boosting and random forest based on Bayesian optimization

Reconstruction of Subsurface Salinity Structure in the South China Sea Using Satellite Observations: A LightGBM-Based Deep Forest Method

Assessment of XGBoost to Estimate Total Sediment Loads in Rivers

An Ensemble-Based Machine Learning Model for Estimation of Subsurface Thermal Structure in the South China Sea

SS-XGBoost: A Machine Learning Framework for Predicting Newmark Sliding Displacements of Slopes

Retrieval of Subsurface Velocities in the Southern Ocean from Satellite Observations

Recovering Bathymetry Using BP Neural Network Combined with Modified Gravity–Geologic Method: A Case Study in the South China Sea

A data-driven approach for predicting depth-averaged velocities in the early stages of underwater glider navigation

Shear Wave Speed Dispersion Characteristics of Seafloor Sediments in the Northern South China Sea

An interpretable machine learning model for predicting cavity water depth and cavity length based on XGBoost–SHAP

Estimating mangrove above-ground biomass at Maowei Sea, Beibu Gulf of China using machine learning algorithm with Sentinel-1 and Sentinel-2 data

Comparative study of five machine learning algorithms on prediction of the height of the water-conducting fractured zone in undersea mining

Correlation between the sound speed ratio and physical properties of seafloor sediments in the northwestern shelf of the south China sea