Abstract:In recent years, with the prohibition of CFC by international community, the cascade refrigeration cycle is showing the development of new features, in which Auto-cascade refrigeration cycle with its simple structure, reliable performance particularly has aroused widespread concern. This paper puts forward using the distillation column instead of the multi-stage segregation device, which make full use of the distillation column to provide good enough conditions for the vapour-liquid contact,creat a greater contact surface, ensure the space and time of heat and mass transfer between each component of refrigerant and lubricant, in order to achieve high efficient separation.This cycle uses environment-friendly non-azeotropic mixed (NARM) R600a\R23\R50 as refrigerant. The improved PT equation is used, according to the quality and energy conservation of the distillation column and heat exchanger to carry on thermodynamic analysis. On this basis, the selection and the calculation of the experimental apparatus and equipment carried out to self-made a auto-cascade refrigeration cycle prototype. Through the cooling test of the eight different mixture ratio, the best quality ratio is found and the minimum temperature the ratio can reach. Through repeated experiments, study that the cycle compression ratio of one component affect on the temperature inside the ultra-low temperature box, the cycle compression ratio of the different components under the same temperature inside the ultra-low temperature box affect on the system performance, and the three throttle, cold boxes cycle high and low pressure ratio and distillation column reflux liquid extraction rate affect on the system performance. The prototype broke the traditional method that access to the depth refrigeration needs multiple refrigeration compressors, only use a single-stage air-conditioning refrigeration compressor with lubrication, to achieve high and low boiling point component through the use of distillation devices, including high-performance lubricant separation, successfully reduced to below -80 degrees C, and system stability. According to the results of a series of experiments, analyzed the ratio of working fluid, cycle pressure ratio, distillation column extraction rate of liquid return, increase heat and the expenditure component's effect on the temperature in the ultra-low temperature box and the COP of system.

Performance Analysis of NH3/CO2 Cascade Refrigeration System Using CO2 Centrifugal Compressor with Gas Bearing: Analyse Des Performances D'un Système De Réfrigération En Cascade NH3/CO2 Utilisant Un Compresseur Centrifuge CO2 Avec Palier À Gaz

Thermodynamic Analysis of an NH3/CO2 Cascade Refrigeration System with Subcooling in the Low-Temperature Circuit Utilizing the Expansion Work

Experimental study on the performance of a twin-screw CO 2 compressor in NH 3/CO 2 cascade refrigeration system

Experimental Investigation on the Performance of Nh3/Co2 Cascade Refrigeration System with Twin-Screw Compressor

Experimental Study on NH_3/CO_2 Cascade Refrigeration System

Design of the CO2 screw refrigerating compressor and performance analysis of its system

Performance Analysis of a Modified Autocascade Refrigeration Cycle with an Additional Evaporating Subcooler

Performance Evaluation and Optimal Configuration Analysis of a CO2/NH3 Cascade Refrigeration System with Falling Film Evaporator–condenser

Energy and Exergy Analysis of NH3/CO2 Cascade Refrigeration System with Subcooling in the Low-Temperature Cycle Based on an Auxiliary Loop of NH3 Refrigerants

Thermodynamic analysis of NH3/CO2 cascade refrigeration system with thermosyphon refrigerant cooling screw compressor motor

Study on Application Scope for CO2 Cascade Refrigeration System and CO2 Secondary Refrigerant System

Theoretical analysis of three CO2/C3H8 (R744-R290) cascade refrigeration systems with precooling processes in low-temperature circuits

A Study On A New Auto-Cascade Refrigerating Cycle

Theoretical and Experimental Study on the Performance of CO2 Hermetic Scroll Compressor

Simulation of NH3/CO2 Two-Stage Low Temperature Refrigeration System

Development of Twin Screw CO2 Compressor for NH3/CO2 Cascade Refrigeration System

Optimization Analyses on the Performance of an Auto-Cascade Absorption Refrigeration System Operating with Mixed Refrigerants

Experimental Research on the R134a/CO2 Cascade Refrigeration System

Thermodynamic Analysis and Experimental Investigation of Internal Heat Exchanger Influence on CO2 Trans-Critical Cycle Performance

Numerical simulation of CO<sub>2</sub> two-stage compression refrigeration system with external intercooler

Thermodynamic Analysis and Experimental Investigation of Internal Heat Exchanger Influence on CO<sub>2</sub> Trans-Critical Cycle Performance