Research on the Seismic Performance of Precast Concrete Columns with Replaceable Bionic Hinge Connections

Yu-Jie Yuan,Shuai Qi,Yan-Li Shi,Wen-Da Wang

DOI: https://doi.org/10.1016/j.istruc.2024.107772

IF: 4.1

2024-01-01

Structures

Abstract:This paper proposes a novel prefabricated reinforced concrete column with replaceable bionic hinge connections (RBHC). The RBHC is characterized by a simple structure and convenient replacement while offering excellent seismic performance. The seismic performance of frames equipped with RBHCs and RBHC are explored by the refined and experimentally validated finite numerical model (FEM). A comprehensive investigation is conducted to assess the impact of various parameters, including the thickness of the energy-consuming thin plate, the weakening rate of the energy-consuming thin plate, the depth of the tibia boot, and the axial pressure, on the RBHC seismic performance. Specifically, the investigation covers failure state, hysteresis curve, energy dissipation capacity, deformation capacity, and damage. The FEM results indicated that the damage of the frame with RBHC is primarily concentrated in the replaceable energy-consuming thin plate, whereas the remaining components exhibit a predominantly elastic state. The yield load capacity of the frame with RBHC exhibited a 36.64 % increase. The RBHC failure mode is governed by the geometry of the energy-consuming thin plate and axial pressure. If the thickness of the energy-dissipating thin plates surpasses 7 mm or the axial compressive force exceeds 750 kN, there is a potential for concrete failure to emerge at the connection point. Additionally, increasing the thickness of the energy-consuming thin plates, tibia boot depth, and axial pressure also effectively enhances the seismic performance of RBHC. When the thickness of the energy-consuming thin plates increased from 4 mm to 6 mm, the load capacity of the RBHC improved by 51.5 %. The weakening rate of the energy-consuming thin plates has a significant impact on the load capacity of the RBHC. For instance, the peak load capacity of specimen 6–30-100–450 decreased by about 30 % compared to specimen 6–0-100–450. Based on the analysis of the RBHC stress mechanism and the thin plate theory, formulas for calculating the RBHC bearing capacity in yield and peak states are proposed. Furthermore, the restoring force model of RBHC is established by theoretical analysis, which is in good agreement with the FEM data.