Abstract:Most existing buildings are not equipped with long-term monitoring system. For the structural model updating and damage detection of this type of structures, ambient vibration test is popular as artificial excitation is not required. This article presents in detail the full-scale ambient vibration test, operational modal analysis, and model updating of a tall building. To capture the dynamic properties of the target 20-story building with limited number of sensors, a 15-setup ambient vibration test was designed to cover at least three measurement points (each consists of a vertical and two orthogonal horizontal measured degrees of freedom) for each selected floor. The modal parameters of each setup were extracted from the measured acceleration signals using a frequency domain decomposition method and were combined to form the global mode shape through the least-squares method. Due to the regularity of the building, a simple class of shear building models was employed to capture the dynamic characteristics of the building under lateral vibration. The identified modal parameters of the building were employed for the model updating of the shear building model to identify the distribution of inter-story stiffness. Since the “amount” of the measured information is small when compared to the “amount” of required information for identifying the uncertain parameters, the model updating problem is unidentifiable. To handle this problem, the Markov chain Monte Carlo–based Bayesian model updating method is employed in this study. The identified modal parameters revealed interesting features about the dynamic properties of the building. The well-matched results between model-predicted and identified modal parameters show the validity of the shear building model in this case study. This study provides valuable experience in the area of structural model updating and structural health monitoring.

Prediction Models for Modal Parameters of High-Rise Buildings Based on the Latest Statistics of Field Measurements

Structural dynamic and aerodynamic parameters identification for a tall building with full-scale measurements

Investigation of Time-Varying Natural Frequencies of High-Rise Buildings under Harsh Excitations Using a High-Resolution Combined Scheme

Investigation of modal parameters of a 600-m-tall skyscraper based on two-year-long structural health monitoring data and five typhoons measurements

Automated Identification and Long-Term Tracking of Modal Parameters for a Super High-Rise Building

Prediction of Wind Load Power Spectrum on High-Rise Buildings by Various Machine Learning Algorithms

Identification Of Natural Frequencies And Dampings Of In Situ Tall Buildings Using Ambient Wind Vibration Data

Wind Loads Characteristics of Irregular Shaped High-Rise Buildings

Aerodynamic loads of tapered tall buildings: Insights from wind tunnel test and CFD

A Mathematical Model of Nonlinear Aerodynamic Damping for High-Rise Buildings

Bayesian model updating of a 20-story office building utilizing operational modal analysis results

Investigation on Modal Coupling–aeroelastic Effect of a Super Tall Building by MDOF Aeroelastic Model Test

Field Measurement Study on Time-Varying Characteristics of Modal Parameters of Super High-Rise Buildings During Super Typhoon

Experimental study on wind-induced vibration and aerodynamic mitigation measures of a building over 800 meters

Field observations on modal properties of two tall buildings under strong wind

Full-scale Measurements of Mode Coupling Vibrations During Super Typhoons on a Rectangular Supertall Building with Limited Sensors

Modal parameter identification of tall buildings based on variational mode decomposition and energy separation

High-fidelity Aerodynamic Model for Generalized Crosswind Loads on Tall Buildings

Evaluation of Wind Loads on Super-Tall Buildings from Field-Measured Wind-Induced Acceleration Response

Effects of High Modes on the Wind-Induced Response of Super High-Rise Buildings

Along-wind aerodynamic damping of high-rise buildings