Versatile Janus Composite Nonwoven Solar Absorbers with Salt Resistance for Efficient Wastewater Purification and Desalination
Shuangjie Sun,Yameng Wang,Binbin Sun,Feifei Zhang,Qing Xu,Hao-Yang Mi,Heng Li,Xiaoming Tao,Zhanhu Guo,Chuntai Liu,Changyu Shen
DOI: https://doi.org/10.1021/acsami.1c05618
2021-05-19
Abstract:Solar steam generation is an efficient way of harvesting solar energy for water purification. Developing a versatile solar absorber with salt resistance and the capability to purify an oil-in-water emulsion is a grand challenge. Herein, a polypropylene (PP) nonwoven fabric-based photothermal absorber is fabricated by the combination of carbon nanotubes (CNTs), polypyrrole (PPy), and a fluorinated hydrophobic coating in a layer-by-layer approach. The specially designed architecture displays a hierarchical microstructure and Janus wetting properties, facilitating solar absorption and heat generation on the evaporation surface, and can effectively prevent salt crystallization. The water layer formed on the superhydrophilic/underwater superoleophobic bottom surface could repel oil droplets and form a channel to advect concentrated salt back into bulk water, which enabled high purity separation of an oil-in-water emulsion and continuous desalinization of seawater without the reduction of the evaporation rate. As a result, the solar absorber can achieve a remarkable evaporation rate of 1.61 kg m<sup>–2</sup> h<sup>–1</sup> and an energy efficiency of 91.2% under 1 sun irradiation and shows extraordinary performance in the purification of contaminated wastewater (over 99.8% purity). The strategy proposed provides a pathway for developing versatile high-performance solar absorbers for the sustainable treatment of saline water, wastewater, and oil-containing water.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c05618?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c05618</a>.Photographs of large-size samples; photographs of samples with high flexibility; stability results of the samples; high-speed video camera photos of the droplet impregnation process on the b-PP surface; absorption spectra of a-PP and b-PP; temperatures changing course of the a-PP and b-PP surfaces under 1 sun solar illumination; stability of the CNT suspension; SEM, TEM, and AFM images of the CNT aqueous paste; droplet impregnation process on the surfaces of a-CNTs and b-CNTs; water supply of the surfaces of a-CNTs and b-CNTs; absorption spectra of the surfaces of a-CNTs and b-CNTs; temperatures changing course of the hot plate and foam; photographs of a-CNTs-PPy before and after 10 h continuous functioning in NaCl solution; digital photograph of the salt pathways; stability of the oil-water emulsion; condensed water collecting device; high-speed video camera photos of the water droplet impregnation process on the surface of a-CNTs-PPy-C; time elapsed snapshots of a-CNTs-PPy-C without prewetted the hydrophilic side; SEM images and surface wettability of the a-CNTs-PPy-C surface after operated for 5 days; illustrations of wastewater and artificial seawater; experimental setup; absorption spectra of the samples; estimation of the total cost of the prototype with 1 m<sup>2</sup> a-CNTs-PPy and a-CNTs-PPy-C; comparison of material costs between a-CNTs-PPy-C and the relevant literature; reproducibility of the properties of the developed photothermal materials; and energy efficiency calculation (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c05618/suppl_file/am1c05618_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.
materials science, multidisciplinary,nanoscience & nanotechnology