Abstract:The state-of-the-art solar-thermal evaporators demonstrating high energy utilization efficiency, a high evaporation rate, and salt rejection are highly desirable in solar-driven low-energy water purification/harvesting. Herein, a novel Janus solar evaporator is constructed by loading polypyrrole (PPy) nanobelts on the polyvinyl alcohol (PVA) hydrogel. The PPy nanobelts present a high solar absorption of 98.3%, leading to a localized solar-thermal efficiency of 82.5% when insulated from bulk water by the PVA hydrogel. The porous PVA hydrogel and the hydrophilic PPy nanobelts enable the efficient three-dimensional water transport. Taking advantages of the synergistic effect in the water-energy nexus, the Janus PPy hydrogel evaporator evaporates water with a high rate of 2.26 kg m–2 h–1 via 80.1% solar energy from 1 sun irradiance with a low PPy loading of ∼3 mg cm–2 even at a rate of 2.64 kg m–2 h–1 via 96.3% solar energy for a biomimetic conical evaporator. The Janus evaporator presents superior salt-resistant desalination and contaminant purification performance in seawater and sewage. Furthermore, a portable solar-thermal purifier equipped with the Janus evaporator desalts real seawater far above the drinking water standard with over a 99.9% salt rejection rate and eliminates 95.8% of chemical oxygen demand in real sewage, highlighting its potential for advanced clean water harvesting.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c13584.Instruments and characterization; desalination and purification tests; instruments; calculations of total solar absorption of PPy nanobelts; calculations of vaporization enthalpy and energy efficiency; digital images of the bulk FeOCl crystal and superfine FeOCl powder; digital images of PPy dispersions in DMSO; XRD pattern of PPy nanobelts; FTIR spectra of PPy nanobelts, PVA and the PPy-PVA compound; temperature curve of the PPy nanobelts under 1 sun irradiation over time; calculations of solar-thermal conversion efficiency; mechanical strength of the PVA hydrogel; π–π interactions of PPy nanobelts; water contact angle of the PPy nanobelt film; UV–vis–NIR reflectance spectra of the upper surface of both flat and conical evaporators; evaporation rate of the conical Janus-type PPy hydrogel evaporator under 1, 2, and 5 sun irradiation; mass loss of simulated average seawater for the conical Janus evaporator with a PPy nanobelt loading content of 3 mg cm–2 compared with the bare pure water as the blank control experiment under 1 sun; corresponding fitted calibration curve of UV–vis absorbance versus gentian violet concentration at 588 nm; water transport rate of the PVA hydrogel; and calculations of COD (PDF)Washing test (MP4)This article has not yet been cited by other publications.

Narrow-bandgap light-absorbing conjugated polybenzobisthiazole: Massive interfacial synthesis, robust solar-thermal evaporation and thermoelectric power generation

Multi-Shelled Hollow Porous Carbon Nanospheres-Based Evaporator for Highly Efficient Solar-Driven Desalination

High-Performance Janus Solar Evaporator for Water Purification with Broad Spectrum Absorption and Ultralow Heat Loss

Solar-driven water evaporation using a collaborative photothermal conversion material system based on carbonized waste polyphenylene sulfide and copper sulfide

Janus Polypyrrole Nanobelt@Polyvinyl Alcohol Hydrogel Evaporator for Robust Solar-Thermal Seawater Desalination and Sewage Purification

All-weather Photothermal-Electrothermal Integrated System for Efficient Solar Steam Generation

Low-tortuosity Water Microchannels Boosting Energy Utilization for High Water Flux Solar Distillation.

Janus Nano‐Micro Structure‐Enabled Coupling of Photothermal Conversion, Heat Localization and Water Supply for High‐Efficiency Solar‐Driven Interfacial Evaporation

Integrated Evaporator for Efficient Solar-Driven Interfacial Steam Generation

Dome-arrayed chitosan/PVA hydrogel-based solar evaporator for steam generation

Scalable and low-cost fabrication of hydrophobic PVDF/WS2 porous membrane for highly efficient solar steam generation

Self-regulating and asymmetric evaporator for efficient solar water-electricity generation

Interface solar evaporator synergistic phase change energy storage for all-day steam generation

A Gelation‐Stabilized Strategy toward Photothermal Architecture Design for Highly Efficient Solar Water Evaporation

Tailoring polypyrrole-based Janus aerogel for efficient and stable solar steam generation

Porous dome array evaporator for high-performance photothermal water evaporation and thermoelectric power generation

Boosted Near‐Infrared Photothermal Conversion in Rare Earth Ions‐Doped 2D SnSe Nanosheets for Solar‐Powered Water Evaporation Systems

Catkins based flexible photothermal materials for solar driven interface evaporation collaborative power generation

Robust PEDOT:PSS-based hydrogel for highly efficient interfacial solar water purification

Novel efficient solar spherical evaporators with adjustable pores to control water supply and evaporation

Bioinspired Asymmetric Polypyrrole Membranes with Enhanced Photothermal Conversion for Highly Efficient Solar Evaporation