Phase Transformations in MOFs Induced by Adsorbate Exchange

Nicholas Corrente,Alexander Neimark,François-Xavier Coudert

DOI: https://doi.org/10.26434/chemrxiv-2024-s96xk

2024-11-19

Abstract:Deformation of nanoporous materials induced by gas adsorption is a ubiquitous phenomenon that plays important role in adsorption separations, gas and energy storage, nanosensors, actuators, secondary gas recovery and carbon dioxide sequestration in coal and shale reservoirs. One of the most prominent examples is the breathing phase transformation in metal-organic frameworks (MOF) associated with significant volume variations upon adsorption and desorption of guest molecules. Here, we present a theoretical framework for quantitative description of the breathing transitions upon adsorption of binary mixtures drawing on the practically important example of the displacement of methane by carbon dioxide in MIL-53 MOF. The proposed approach, that is based on the concept of the adsorption stress, reveals the mechanisms of the framework deformation and breathing phase transformation between the large pore (LP) and narrow pore (NP) conformations. We show that when the pure CH4 adsorption proceeds entirely in the LP phase, even a small addition of CO2 makes the LP phase unstable and triggers conversion to the NP phase, and the reverse NP-LP transformation occurs upon further displacement of CH4 by CO2. The theoretical predictions of adsorption and strain isotherms are confirmed by an agreement with the literature experimental studies performed on MIL-53 (Al) at different CH4-CO2 mixture pressures and temperatures. The proposed general approach is applicable to other flexible nanoporous structure and gas mixtures.

Chemistry

What problem does this paper attempt to address?

This paper aims to solve the problem of the phase - change mechanism in metal - organic framework (MOF) materials during the multi - component gas adsorption process. Specifically, the research focuses on the phase - change behavior in the MIL - 53 MOF material during the replacement of methane (CH₄) by carbon dioxide (CO₂), from the large - pore (LP) phase to the small - pore (NP) phase and vice versa. These phase changes are closely related to the deformation of the material and are crucial for understanding the performance of MOF materials in applications such as gas adsorption, separation, and storage.

### Research Background
1. **Phase - change Phenomenon**: MOF materials undergo significant volume changes during the gas adsorption process, a phenomenon known as "breathing" phase change. Such phase changes play an important role in fields such as adsorption separation, gas storage, nano - sensors, actuators, secondary gas recovery, and carbon dioxide sequestration in coal - bed gas and shale - gas reservoirs.
2. **Limitations of Existing Research**: Although most practical applications involve multi - component gas mixtures, existing experimental and theoretical studies mainly focus on the adsorption of single - component gases.

### Research Objectives
1. **Establish a Theoretical Model**: Propose a theoretical framework based on the concept of adsorption stress to quantitatively describe the phase - change behavior of MOF materials during the multi - component gas adsorption process.
2. **Verify the Model**: Verify the validity of the proposed theoretical model by comparing it with the experimental data in the literature on MIL - 53 (Al) under different CH₄ - CO₂ mixture pressures and temperatures.

### Main Findings
1. **Phase - change Mechanism**: The study found that when pure CH₄ adsorption is completely carried out in the LP phase, even a small amount of CO₂ will make the LP phase unstable and trigger the transformation to the NP phase. Further increasing the content of CO₂ will lead to the reverse transformation from the NP phase to the LP phase.
2. **Experimental Verification**: The theoretically predicted adsorption and strain isotherms are in good agreement with the experimental data, especially at 273 K and higher temperatures, where pure CH₄ adsorption occurs in the LP phase and the addition of CO₂ will trigger a phase change.

### Formula Summary
- **Adsorption Stress**:
\[
\sigma_{\text{ads}} = -\left( \frac{\partial \omega}{\partial N_i} \frac{\partial N_i}{\partial v} + \frac{\partial \omega}{\partial K_i} \frac{\partial K_i}{\partial v} \right)
\]
where \(\omega\) is the grand thermodynamic potential of the adsorption phase, \(N_i\) and \(K_i\) are the maximum adsorption capacity and Langmuir parameter of the \(i\)-th component respectively, and \(v\) is the unit cell volume.

- **Phase - change Conditions**:
\[
\omega_{\text{NP}} = \omega_{\text{LP}}
\]
that is, under the phase - equilibrium condition, the osmotic potentials of the NP phase and the LP phase are equal.

- **Strain**:
\[
\epsilon = \frac{\sigma_{\text{ads}} - p}{k}
\]
where \(\epsilon\) is the volumetric strain, \(\sigma_{\text{ads}}\) is the adsorption stress, \(p\) is the external pressure, and \(k\) is the volumetric elastic modulus.

Through these theoretical and experimental results, the paper provides new insights into understanding and predicting the phase - change behavior of MOF materials during the multi - component gas adsorption process.