Abstract:Ni-rich layered cathode materials are considered as promising electrode materials for lithium ion batteries due to their high energy density and low cost. However, the low rate performance and poor electrochemical stability hinder the large-scale application of Ni-rich layered cathodes. In this work, both the rate performance and the structural stability of the Ni-rich layered cathode LiNi0.8Co0.1Mn0.1O2 are significantly improved via the dual-site doping of Nb on both lithium and transition-metal sites, as revealed by neutron diffraction results. The dual-site Nb-doped LiNi0.8Co0.1Mn0.1O2 delivers 202.8 mAh·g–1 with a capacity retention of 81% after 200 electrochemical cycles, which is much higher than that of pristine LiNi0.8Co0.1Mn0.1O2. Moreover, a discharge capacity of 176 mAh·g–1 at 10C rate illustrates its remarkable rate capability. Through in situ X-ray diffraction and electronic transport property measurements, it was demonstrated that the achievement of dual-site doping in the Ni-rich layered cathode can not only suppress the Li/Ni disordering and facilitate the lithium ion transport process but also stabilize the layered structure against local collapse and structural distortion. This work adopts a dual-site-doping approach to enhance the electrochemical performance and structural stability of Ni-rich cathode materials, which could be extended as a universal modification strategy to improve the electrochemical performance of other cathode materials.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c00755?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c00755</a>.SEM, XPS, and EDS of the materials; structure diagram; XPS depth profile of Co 2p elements; charge/discharge curves of NCM-0% and NCM-1%; equivalent circuit used to fit the spectrum of EIS; Rietveld refinement results; and comparison of calculated electrochemical parameters deduced from EIS (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c00755/suppl_file/am1c00755_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Boosting the Electrochemical Performance of the Ni-rich LiNi0.96Co0.02Mn0.02O2 Cathode by High-Valence Zr/Mo Dual-Doping.

Boosting the electrochemical performance of Ni-rich LiNi0.96Co0.02Mn0.02O2 cathode by high-valence Zr/Mo dual-doping

Mitigation of Cation Mixing of LiNiO2-based Cathode Materials by Li-doping for High-Performing Lithium-Ion Battery

Synergistically regulating the structural tolerance of Co-free Ni-rich cathode materials at high-rate through multi-heteroatoms substitution

Boosting cell performance of LiNi0.8Co0.1Mn0.1O2 cathode material via structure design

Improved Li-ion Diffusion and Stability of a LiNi0.5Mn1.5O4 Cathode Through in Situ Co-Doping with Dual-Metal Cations and Incorporation of a Superionic Conductor

Microstructure boosting the cycling stability of LiNi0.6Co0.2Mn0.2O2 cathode through Zr-based dual modification

Collaboratively enhancing electrochemical properties of LiNi0.83Co0.11Mn0.06O2 through doping and coating of quadrivalent elements

Complementary dual-doping of LiNi0.8Co0.1Mn0.1O2 cathode enhances ion-diffusion and stability for Li-ion batteries

A Three in One Strategy to Achieve Zirconium Doping, Boron Doping, and Interfacial Coating for Stable LiNi0.8Co0.1Mn0.1O2 Cathode

A Three in One Strategy to Achieve Zirconium Doping, Boron Doping, and Interfacial Coating for Stable LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathode

Enabling Structure/Interface Regulation for High Performance Ni‐Rich Cathodes

Dual-Element-Modified Single-Crystal LiNi0.6Co0.2Mn0.2O2 As a Highly Stable Cathode for Lithium-Ion Batteries.

Synthesis of LiNi0.9Co0.05Mn0.05O2 and modification with co-doping of Zr4+ and W6+ using acid leaching solution from spent lithium-ion batteries

Electrochemical performance of Li-rich material Li[Li0.2Mn0.54Co0.13Ni0.13]O2 by ZrO2 coating

Synergistic Effects of Surface Coating and Bulk Doping in Ni‐Rich Lithium Nickel Cobalt Manganese Oxide Cathode Materials for High‐Energy Lithium Ion Batteries

Revealing the Multiple Influences of Zr Substitution on the Structural and Electrochemical Behavior of High Nickel LiNi0.8Co0.1Mn0.1O2 Cathode Material

Enhancing the Electrochemical Performance and Structural Stability of Ni-Rich Layered Cathode Materials via Dual-Site Doping

Structural Reinforcement through High-Valence Nb Doping to Boost the Cycling Stability of Co-Free and Ni-Rich LiNi 0.9 Mn 0.1 O 2 Cathode Materials

Modulating the Li+/Ni2+ replacement and electrochemical performance optimizing of layered lithium-rich Li1.2Ni0.2Mn0.6O2 by minor Co dopant

Towards Rational Design of High Performance Ni-rich Layered Oxide Cathodes: the Interplay of Borate-Doping and Excess Lithium