Abstract:Welding copper to itself and other metals is challenging using conventional welding techniques. The process window for welding copper with an infrared (IR) laser, resistance welder, or an ultrasonic welder is very narrow. In the case of the infrared laser, the high reflectivity at these wavelengths makes it difficult to couple the power into the material and control the temperature of the weld puddle. In the case of ultrasonic and resistive welding, the high thermal conductivity of the material and the tendency to create particles cause less than ideal welds. These fundamental problems can be overcome by using a laser with a wavelength that is highly absorbed by these materials. This paper will present recent welding results using a fiber coupled 500-W blue laser system coupled to a welding head to deliver a 215 μm spot size and an average power density of 1.6 MW/cm2. These results will be compared with the authors’ previous results from a free space delivered laser system that was the prototype for the 500-W fiber coupled laser. The fiber coupled laser system performance exceeded the free space performance because of two factors: (1) the welding was able to be performed at normal incidence (90°) to the surface allowing for greater power coupling into the copper and (2) a smaller spot size with a higher power density was used (1.6 MW/cm2 vs 398 kW/cm2). Tests on welding battery components, including stacks of foils, buss bars, hairpins (for motors), and other components, with no porosity and no spatter will be covered. Both copper and mixed metals welding results will be presented. Tests have also been performed with 1 kW of laser power from a processing head with a 400 μm spot size and an average power density of 800 kW/cm2. Both systems have enough power density to initiate the keyhole welding process in copper, stainless steel, and aluminum. The difference in welding speeds for these two systems will be compared in this paper.

Blue Laser Conduction Spot Welding of Pure Copper Hairpins

Non-contact Ultrasonic-Assisted Laser Welding of Copper Hairpins

Stable conduction mode welding of conventional high-reflectivity metals with 2000 W blue laser

Laser welding components for electric vehicles with a high-power blue laser system

Blue Laser Conduction Welding of Dissimilar Cu and Al Sheets

Bead-on-plate welding of pure copper with a 1.5-kW high-power blue diode laser

Influence of process parameters in blue laser welding of copper and aluminum thin sheets

Achieving high robust laser conduction welding and enhanced joint conductivity in pure copper foil stacks using a flat-top blue laser

Blue laser welding of laminated electrical steels: dynamic process, weld bead characteristics, mechanical and magnetic properties

Hybrid laser system with blue laser and near-infrared fiber laser for copper welding

Laser pressure welding of copper

Study on laser welding of copper material by hybrid light source of blue diode laser and fiber laser

Laser welding of laser-structured copper connectors for battery applications and power electronics

Single Pass Hybrid Laser–mig Welding of 4-Mm Thick Copper Without Preheating

Molten Pool Behaviors and Energy Absorption in Coaxial Hybrid Blue-Ir Lasers Welding of a Copper Material

Effect of blue diode laser intensity on welding of pure copper wire using blue-IR hybrid laser

Comprehensive Study of Microstructural Evolution and Strengthening Mechanism of High-Performance Pure Copper Prepared by Blue Laser Metal Deposition (B-Lmd)

Quasi-Continuous Wave Pulsed Laser Welding of Copper Lap Joints Using Spatial Beam Oscillation

Quality improvement of copper welds by laser microwelding with the usage of spatial power modulation

Microstructure and Properties of the Laser Butt Welded 1.5-Mm Thick T2 Copper Joint Achieved at High Welding Speed

Laser-induced Single Point Nanowelding of Silver Nanowires