Abstract:The (1 − x)(Li 0.03 Na 0.5 K 0.47 )(Nb 0.92 Sb 0.05 Ta 0.03 )O 3 –xBa 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3 (LNKNST–BCZT, x = 0, 0.5, 1.5, 2.5, and 3.5%) lead-free piezoceramics were synthesized by the conventional solid-state reaction method with adding nano-sized Ba 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3 (BCZT) powder to investigate their influences on crystal structure and electrical properties. The X-ray diffraction (XRD) analysis reveals that all the sintered LNKNST–BCZT ceramics exhibit pure perovskite structure with the mainly rhombohedral (R) phase or the coexistence of rhombohedral (R) phase and tetragonal (T) phase. The composition of the LNKNST–1.5%BCZT ceramics locates around the critical point, i.e., the ceramics changing from the coexistence of rhombohedral (R) phase and tetragonal (T) phase to purely rhombohedral (R) phase, and presents the most densified microstructure morphology, which can be confirmed further by the field emission scanning electron microscope (FESEM) observation. There are two dielectric anomalies in the temperature dependent dielectric properties curves of the LNKNST–BCZT ceramics, which correlate with the ferroelectric rhombohedral (R) phase changing to the ferroelectric tetragonal (T) phase, and then to the paraelectric cubic (C) phase. Both the Curie–Weiss law and the power law fittings confirm the diffuse phase transition ferroelectrics characteristic of the LNKNST–1.5%BCZT ceramics, which is considered as correlating with the polar nanoregions (PNRs). Due to the densification effect caused by the chosen amount of nano-sized BCZT doping and the construction of R–T polymorphic phase boundary, the LNKNST–1.5%BCZT ceramics exhibit the best ferroelectric and piezoelectric properties. The complex impedance spectroscopy analysis confirms that the extrinsic electrical conduction mechanism at high temperatures is dominated by the oxygen vacancies induced by the evaporation of the alkali metals during sintering.

Composite Hardening Effect in KNN Piezoelectric Ceramics

Enhanced Piezoelectric Properties and Thermal Stability in the (K0.5Na0.5)NbO3:ZnO Lead‐Free Piezoelectric Composites

Hardening Effect on the Electromechanical Properties of KNN-Based Ceramics Using a Composite Approach

New K0.48Na0.52NbO3–Bi(Zn0.5Zr0.5)O3 Lead-Free Ceramics: Microstructure and Piezoelectricity

Effects of nano-sized BCZT on structure and electrical properties of KNN-based lead-free piezoceramics

BNH doping enhances the piezoelectric properties and temperature stability of KNN-based lead-free piezoelectric ceramics

Preparation of KNN Based Lead-Free Piezoelectric Ceramics Via Composition Designing and Two-Step Sintering

High Piezoelectric Properties and High TC in KNN-Based Lead-Free Ceramics Sintered in Reducing Atmosphere

Role of ZnO dopant in enhancing piezoelectric characteristics in KNN‐based piezoelectric ceramics

The Effect of Microstructure on Piezoelectric Properties and Temperature Stability for MnO Doped KNN-based Ceramics Sintered in Different Atmospheres

High-Performance 0-3 Type Niobate-Based Lead-Free Piezoelectric Composite Ceramics with ZnO Inclusions.

Hardening Effect in Lead-Free KNN-Based Piezoelectric Ceramics with CuO Doping

Defect engineering on phase structure and temperature stability of KNN‐based ceramics sintered in different atmospheres

High Piezoelectric Performance of KNN-Based Ceramics over a Broad Temperature Range through Crystal Orientation and Multilayer Engineering

Effects of ZnO Nanoneedles Addition on the Mechanical and Piezoelectric Properties of Hard PZT-based Composites

Adaptive ferroelectric states in KNN-based piezoceramics: Unveiling the mechanism of enhancing piezoelectric properties through multiple phase boundary engineering

Sintering Effect on Microstructure and Properties of (k,na)nbo3 Ceramics

Temperature Stability and Electrical Properties of MnO‐doped KNN‐based Ceramics Sintered in Reducing Atmosphere

Significantly enhanced piezoelectric temperature stability of KNN-based ceramics through multilayer textured thick films composite

Hardening of K0.5Na0.5NbO3 Piezoceramics with Cu and the Temperature Dependence in High-Power Drive

Effects of the post-annealing reductive-atmosphere-sintered (K0.48Na0.52)NbO3 lead-free piezoceramics