Abstract:The model predictive current control (MPCC) method is considered to be one of the most effective methods to solve the dual three-phase permanent magnet synchronous motor driving problem. However, the existing traditional MPCC method is limited. In some cases, inaccuracies in the selected optimal voltage vector ( V opt ) can lead to additional current ripple and unsatisfactory steady-state performance, and the MPCC method needs to carry out the traversal optimization process, which increases the computational burden. To solve the above problem, this paper proposes an MPCC method based on an extended finite control set and duty cycle modulation. Firstly, 12 virtual voltage vectors (V 3 s) with new directions are synthesized, and an extended control set containing 24 V 3 s is constructed to effectively reduce harmonic current and torque ripple. Then, the dead-beat current control is used to calculate the sector of the reference voltage vector ( V ref ), and the V opt is selected by judging the position of the sector, which reduces the calculation burden. More importantly, the technique of duty cycle modulation is put forward to calculate the residence time of the V opt , aiming to amend the V opt magnitude, which can improve the control accuracy. For ease of understanding and software implementation on Digital Signal Processors, triangular carriers are used to generate asymmetric switching sequences. Finally, the experimental results show that the proposed method has better current quality and lower torque ripple than the two existing methods, and the calculation burden is reduced.

The Common-Mode Voltage Suppression Method for PMSM Based on Current Predictive Control

Synthetic Vectors-Based Predictive Control of Dual Three-Phase PMSMs for Current Harmonics Mitigation Considering Average Deception Effect

Model Predictive Current Control for Dual Three-Phase Permanent Magnet Synchronous Motor with Common-Mode Voltage Suppression

High-Efficient Multi-Vector Model Predictive Control with Common-Mode Voltage Suppression

Common Mode Current Suppression for Permanent Magnet Synchronous Motor Based on Model Predictive Control

A Deadbeat Predictive Current Harmonics Suppression Method for IPMSM Based on Quasi Proportional Resonant Control

Improved Model Predictive Current Control for PMSM Drives Based on Dynamic Reference Current

A Combined Model Predictive Current Control for SPMSM Drive with Improved Robustness and Control Precision

Common-Mode Voltage Reduction Method Based on Variable Sampling Frequency Finite Control Set-Model Predictive Control for PMSM Drive Systems

A Model Predictive Control Scheme with Minimum Common-Mode Voltage for PMSM Drive System Fed by VSI

Current Prediction Error Reduction Method of Predictive Current Control for Permanent Magnet Synchronous Motors.

A Soft-Switching Current-Source-Inverter-Fed Motor Drive With Reduced Common-Mode Voltage

An I/f Control Method With Closed-loop Regulation of Current Vector for Surface Permanent Magnet Synchronous Motor Drives

An Improved Model-Free Predictive Current Control for PMSM Drives Based on Current Circle Tracking Under Low-Speed Conditions

Model predictive current control method of dual three-phase permanent magnet synchronous motor based on improved SVPWM

Model Predictive Current Control Algorithm Based on Joint Modulation Strategy for Low-Inductance PMSM

Analysis and Suppression of Common Mode Voltage for Motor Drive in EV

Low complexity model predictive current control for dual three-phase permanent magnet synchronous motor with extended control set and duty cycle modulation

Model Predictive Control with Duty Ratio Modulation for Open-Winding PMSM Driveswith Common DC Bus

Continuous Voltage Vector Model-Free Predictive Current Control of Surface Mounted Permanent Magnet Synchronous Motor