Abstract:Antimony (Sb)-based materials have been extensively studied as anodes for sodium-ion batteries (SIBs) because of the high theoretical capacity of Sb (660mAh/g). However, the poor electrochemical behaviors caused by the severe volume expansion of Sb during the sodiation/desodiation process constrains its practical applications. Herein we report a facile microwave-assisted hydrothermal method for the synthesis of hierarchical Sb2MoO6 microspheres assembled by one-dimensional nanobelts without the use of any surfactants. When used as an anode material for SIBs, it delivers large reversible capacities of 637.3 and 498.7mAh/g at current densities of 200 and 1000mA/g after 100 cycles, respectively, exceptional rate capability with 428.1mAh/g retained at 5 A/g and long cycle life (460.6mAh/g with capacity retention of 98.7% after 450 cycles at 2 A/g). Moreover, a sodium-ion full cell with Sb2MoO6 anode was assembled, presenting a large capacity and stable cyclability with a high output voltage. Based on extensive experimental analyses and first-principles calculations, we find that such superior electrochemical performances can be attributed to its distinctive capability of forming a self-constructing conductive Na-Mo-O buffer matrix during discharge/charge process, which not only efficiently buffers the volume expansion of the Na-Sb alloying/dealloying, but also provides good electronic conductivity to facilitate electron transfer. Notably, the novel hierarchical Sb2MoO6 microsphere anode exhibits excellent electrochemical performances without hybridizing with any special carbonaceous materials. Such high-performance novel anode material together with the new findings in electrochemical mechanism in this work may open a way for the design of future energy storage devices.

1T′-Mosp Monolayer As an Anode Material for Sodium-Ion Batteries with Ultrahigh Storage Capacity and Ultralow Diffusion Barrier

Exploring a novel two-dimensional metallic Y4C3 sheet applied as an anode material for sodium-ion batteries

SnS2 Nanowall Arrays Toward High-Performance Sodium Storage.

Few-Layered Mos2/C with Expanding D-Spacing As A High-Performance Anode for Sodium-Ion Batteries

Na1.68H0.32Ti2O3SiO4 center dot 1.76H(2)O as a Low-Potential Anode Material for Sodium-Ion Battery

Metal-Semiconductor Phase Twinned Hierarchical MoS<sub>2</sub> Nanowires with Expanded Interlayers for Sodium-Ion Batteries with Ultralong Cycle Life

Advanced MoS2 and Graphene Heterostructures As High-Performance Anode for Sodium-Ion Batteries.

Hierarchical Sb2MoO6 Microspheres for High-Performance Sodium-Ion Battery Anode

Anchoring atomic antimony in an intercalative Mo–S framework via soft covalent bonding for fast-charging and long-lived sodium ion batteries

Interlayer-expanded MoS2 nanosheets/nitrogen-doped carbon as a high-performance anode for sodium-ion batteries

3D heterojunction assembled via interlayer-expanded MoSe2 nanosheets anchored on N-doped branched TiO2@C nanofibers as superior anode material for sodium-ion batteries

Sulfur nanodots as MoS2 antiblocking agent for stable sodium ion battery anodes

Neuron-Inspired Design of High-Performance Electrode Materials for Sodium-Ion Batteries

3D Interconnected MoS2 with Enlarged Interlayer Spacing Grown on Carbon Nanofibers As a Flexible Anode Toward Superior Sodium-Ion Batteries

Structural Regulation Enabled Stable Hollow Molybdenum Diselenide Nanosheet Anode for Ultrahigh Energy Density Sodium Ion Pouch Cell

Hierarchical MoS2/Carbon microspheres as long-life and high-rate anodes for sodium-ion batteries

Unveiling the Potential of Boron-Rich Two-Dimensional TiB 6 Monolayer as a High-Performance Anode Material for Sodium-Ion Batteries: Insights into Correlation Mechanisms for Multi-Ion Migration

Ultrahigh Capacity 2D Anode Materials for Lithium/sodium-Ion Batteries: an Entirely Planar B7P2 Monolayer with Suitable Pore Size and Distribution

1T MoS2 Nanosheets with Extraordinary Sodium Storage Properties Via Thermal-Driven Ion Intercalation Assisted Exfoliation of Bulky MoS2

Design and synthesis Few-layer Molybdenum Oxide Selenide Encapsulated in 3D interconnected nitrogen-doped carbon Anode Toward High-Performance sodium storage

Ultrasmall MoS 2 Nanosheets Mosaiced into Nitrogen-Doped Hierarchical Porous Carbon Matrix for Enhanced Sodium Storage Performance