Abstract:Small nuclear power plants can provide a stable, carbon-free energy supply to civil infrastructure and industrial enterprises in remote regions isolated from unified energy systems. More than 70 projects of small modular reactors are currently being developed by IAEA member countries; several low-power power units are already supplying thermal and electrical energy to consumers. One of the main limitations standing in the way of widespread dissemination of this technology is the high specific capital cost of a low-power nuclear power plant; therefore, new scientific and technical solutions are needed in this industry. Increasing the thermodynamic efficiency of power cycles of small modular reactors can become a driver for reducing the cost of supplied electrical energy. This paper presents the results of a comprehensive thermodynamic analysis of existing and promising power cycles for small modular reactors. In addition to traditional steam power cycles, cycles using non-traditional working fluids, including carbon dioxide, freons, and helium cycles, are considered. Optimal sets of thermodynamic parameters were determined to ensure maximum net efficiency of electricity production. For water-cooled reactor plants, a maximum efficiency of 33.5% at an initial temperature of 300 °C could be achieved using a steam turbine cycle. It was revealed that for reactor plants with liquid metal and liquid salt coolant in the range of initial temperatures above 550–700 °C, the maximum thermal efficiency was provided by the Brayton recompression cycle with a carbon dioxide coolant: the net electrical efficiency exceeded the level of steam turbine plants, with intermediate superheating of the steam, and could reach a value of 49.4% at 600 °C. This makes the use of these cycles promising for low-power nuclear power plants with a high initial temperature. In small gas-cooled reactor plants with a helium coolant, the use of a binary cycle consisting of a helium Brayton cycle and a steam-powered Rankine cycle provided an efficiency of 44.3% at an initial helium temperature of 700 °C and 52.9% at 1000 °C. This was higher than in the Brayton cycle with a recuperator, with a minimum temperature difference in the heat exchanger of 20 °C: the efficiency was 40.2% and 52%, respectively. Also, the transition to power cycles with non-traditional working fluids will lead to a change in the operating conditions of turbomachines and heat exchangers.

Exergy Analysis of a Small Modular Reactor Nuclear Power Plant under Constant and Pure Sliding Pressure Operation

Exergy Analysis for Main Heat Transfer System of CEFR

Operation Scheme Analysis of a Multipurpose Small Modular Reactor under Cogeneration Condition Based on a Once-Through Steam Generator Dynamic Model

Performance of Different Absorber Materials and Move-In/out Strategies for the Control Rod in Small Rod-Controlled Pressurized Water Reactor: A Study Based on KLT-40 Model

Advanced Energy, Exergy, and Environmental (3E) Analyses and Optimization of a Coal-Fired 400 MW Thermal Power Plant

Exergy Analysis of the Turbine System in A 1000 Mw Double Reheat Ultra-Supercritical Power Plant

Dynamic modeling and validation of the 5 MW small modular supercritical CO2 Brayton-Cycle reactor system

A Master-Slave Control Strategy of the Multi-Modular SMR

Simulation Analysis of an Open Natural Circulation for the Passive Residual Heat Removal in IPWR

Thermodynamic Analysis and Comparison of Power Cycles for Small Modular Reactors

Transient analysis and optimization of passive residual heat removal heat exchanger in advanced nuclear power plant

Thermodynamic Analysis and Performance Evaluation of a Novel Energy Storage-Based Supercritical CO2 Power System with Ejector Driven by Nuclear Energy

Analyses of the Control System Strategies and Methodology for Part Power Control of the Simple and Intercooled Recuperated Brayton Helium Gas Turbine Cycles for Generation IV Nuclear Power Plants

Exergy Analysis for Thermal Power System of A 600 MW Supercritical Power Unit

Analysis of heat-loss mechanisms with various gases associated with the surface emissivity of a metal containment vessel in a water-cooled small modular reactor

Thermal–hydraulic Performance Analysis of IPWR During Full Pressure Start-Up Mode

Exergy and Exergoeconomic Analyses Based on Recompression Cycle of the Supercritical CO2 Brayton Cycle for Sodium-cooled Fast Reactor

Performance Analysis Of Closed Brayton Cycle System For Small Modular Reactor

Thermal-hydraulic Analysis of a Lead–bismuth Small Modular Reactor under Moving Conditions

Numerical Investigation of Process Parameter Effects on Flow Oscillations in a Natural Circulation Boiling Integral PWR-Type SMR Test Rig

Analysis of supercritical CO2 closed Brayton cycle applied to SMR