Abstract:Nowadays, anodized coating on additively manufactured (AM) or 3D printed Al-10Si-Mg alloy are used for various components in spacecraft such as antenna feeds, wave guides, structural brackets, collimators, thermal radiators etc. In this study, Artificial Neural Network (ANN) and Power law-based models are developed from experimental nanoindentation data for predicting elastic modulus and hardness of anodized AM Al-10Si-Mg at any desired loads. Data from nanoindentation experiments conducted on plan- and cross-sections of anodized coating on AM Al-10Si-Mg alloy was considered for modelling. Apart from nanomechanical properties, load and displacement curves were predicted using Python software from ANN and the Power law model of nanoindentation. It is observed that the ANN model of 50 mN nanoindentation experimental data can accurately predict the loading pattern at any desired load below 50 mN. Elastic modulus and hardness of anodized AM Al-10Si-Mg computed from ANN and the power law model of the unloading curve are also comparable with the values obtained from Weibull distribution analysis reported elsewhere. The derived models were also used to predict nanomechanical properties at 25 and 35 mN, for which no experimental data was available. The computed hardness of plan section of the anodic coating is 3.99 and 4.02 GPa for 25 and 35 mN, respectively. The computed hardness of cross-section of the anodic coating of is 7.16 and 6.61 GPa for 25 and 35 mN, respectively. Thus, the ANN and Power law model of nanoindentation can predict elastic modulus and hardness at different loads by conducting the minimum number of experiments. The novel approach to predict nanomechanical properties using ANN resulted in determining realistic and design specific data on hardness and modulus of the anodized coating on AM Al-10Si-Mg alloy.

Artificial neural network for inferring radiative property variations across advanced high strength steel coils

Direct Prediction of Steam Cracking Products from Naphtha Bulk Properties: Application of the Two Sub-Networks ANN

An ANN Hardness Prediction Tool Based on a Finite Element Implementation of a Thermal–Metallurgical Model for Mild Steel Produced by WAAM

High-Dimensional Data-Driven Optimal Design for Hot Strip Rolling of Microalloyed Steel

Development of a neural architecture to predict the thermal conductivity of nanofluids

Artificial neural network approach for mechanical properties prediction of as-cast A380 aluminum alloy

ARTIFICIAL NEURAL NETWORK MODEL FOR PREDICTION OF MECHANICAL PROPERTIES OF STEEL

Artificial neural network-based prediction model of residual stress and hardness of nickel-based alloys for UNSM parameters optimization

Artificial Neural Network: Some Applications in Physical Metallurgy of Steels

Physics-informed neural network for predicting hot-rolled steel temperatures during heating process

An Overview of Neural Network Based Modeling in Alloy Design and Thermomechanical Processing of Austenitic Stainless Steels

Artificial Neural Network-based approach for prediction of nanomechanical properties of anodic coating on additively manufactured Al-10Si-Mg alloy

Artificial neural network–modified heat transfer model for furnace coil rolling of magnesium alloy plate

Development of Neural Networks to Study Flow Behavior of Medium Carbon Microalloyed Steel during Hot Forming

Modelling of microstructure and mechanical properties of steel using the artificial neural network

Quantifying Mechanical Properties of Automotive Steels with Deep Learning Based Computer Vision Algorithms

High-Entropy Alloys Properties Prediction Model by Using Artificial Neural Network Algorithm

Thermo-physical properties prediction of carbon-based magnetic nanofluids based on an artificial neural network

Design of medium carbon steels by computational intelligence techniques

Prediction of gas metal arc welding parameters based on artificial neural networks

Prediction of the Property of Corrosion Resistance of A Surface Alloyed Layer by Using Artificial Neural Networks