Abstract:Anti-icing superhydrophobic surfaces have attracted tremendous interests due to their repellency to water and extremely low ice affinity, whereas the weak durability has been the bottleneck for further applications. Surface durability is especially important in long-term exposure to low-temperature and high-humidity environments. In this study, a robust micro-nano-nanowire triple structure-held PDMS superhydrophobic surface was fabricated via a hybrid process: ultrafast-laser-prepared periodic copper microstructures were chemically oxidized, followed by modification of PDMS. The hedgehog-like surface structure was composed of microcones, densely grown nanowires, and tightly combined PDMS. The capillary force difference in micro-nanostructures drove PDMS solutions to distribute evenly, bonding fragile nanowires to form stronger composite cones. PDMS replaced the commonly used fragile fluorosilanes and protected nanowires from breaking, which endowed the surfaces with higher robustness. The ductile PDMS-nanowire composites possessed higher resiliency than brittle nanowires under a load of 1 mN. The surface kept superhydrophobic and ice-resistant after 15 linear abrasion cycles under 1.2 kPa or 60 icing-deicing cycles under -20 degrees C or 500 tape peeling cycles. Under a higher pressure of 6.2 kPa, the contact angle (CA) was maintained above 150 degrees until the abrasion distance exceeded 8 m. In addition, the surface exhibited a rare spontaneously optimized performance in the icing-deicing cycles. The ice adhesion strength of the surface reached its lowest value of 12.2 kPa in the 16th cycle. Evolution of surface roughness and morphology were combined to explain its unique U-shaped performance curves, which distinguished its unique degradation process from common surfaces. Thus, this triple-scale superhydrophobic surface showed a long-term anti-icing performance with high deicing robustness and low ice adhesion strength. The proposed nanostructure-facilitated uniform distribution strategy of PDMS is promising in future design of durable superhydrophobic anti-icing surfaces.

Durable bionic honeycomb slippery liquid-infused porous surfaces with anti-icing and water-collecting properties

Employing Micro Pyramidal Holes and Porous Nanostructures for Enhancing the Durability of Lubricant-Infused Surfaces in Anti-Icing

Highly Transparent, Hot Water and Scratch Resistant, Lubricant-Infused Slippery Surfaces Developed from a Mechanically-Weak Superhydrophobic Coating

Effect of Lubricant Loading in Slippery Liquid-Infused Surface for Persistent Anti-Icing Performance

Biomimetic lubricant-grafted surfaces on laser-textured microwell arrays with multifunctionality

"Honeycomb" Photothermal Lubricated Porous Foam with Low-Temperature, Weak-Light, Anti-Icing/Deicing, and Long-Lasting Lubrication Properties

Robust Slippery Liquid-Infused Porous Network Surfaces for Enhanced Anti-icing/Deicing Performance.

Ultraslippery Surface for Efficient Fog Harvesting and Anti-Icing/Fouling

Micro/Nano Hierarchical Crater-Like Structure Surface With Mechanical Durability and Low-Adhesion for Anti-Icing/Deicing

A Bioinspired Slippery Surface with Stable Lubricant Impregnation for Efficient Water Harvesting.

Bioinspired Depletion‐Resistant Lubricant‐Infused Surfaces with Self‐Replenishing Lubrication Through Capillary Filament

One-step synthesis of functional slippery lubricated coating with substrate independence, anti-fouling property, fog collection, corrosion resistance, and icephobicity

Di-particles-derived Slippery Lubricant-Infused Porous Surface with Broad Anti-Adhesion Performance

Design and Preparation of Bioinspired Slippery Liquid-Infused Porous Surfaces with Anti-Icing Performance Via Delayed Phase Inversion Process

Highly transparent and robust slippery lubricant-infused porous surfaces with anti-icing and anti-fouling performances

Functionalized Super-Hydrophobic Nanocomposite Surface Integrating with Anti-Icing and Drag Reduction Properties

Bio-inspired self-replenishing and self-reporting slippery surfaces from colloidal co-assembly templates

Antiwetting and Antifouling Performances of Different Lubricant-Infused Slippery Surfaces.

A Superhydrophobic Anti-Icing Surface with a Honeycomb Nanopore Structure

WO3-Based Slippery Liquid-Infused Porous Surfaces with Long-Term Stability.

Micro-Nano-Nanowire Triple Structure-Held PDMS Superhydrophobic Surfaces for Robust Ultra-Long-Term Icephobic Performance.