Abstract:This paper describes the development of a computational model for the rope–sheave contact interaction in reeving systems when the ropes are modeled with an arbitrary Lagrangian–Eulerian approach. This discretization approach has been developed in previous publications as a general and systematic method for the modeling and simulation of reeving systems. However, the rope–sheave contact model was avoided assuming the no-slip contact condition. The contact model developed in this paper introduces specialized ALE-ANCF-cubic rope contact elements that are used to discretize the rope segment winded at the sheave. The contact is modeled using a set of virtual discrete bristles attached to material points in the mid-line of the rope in one end and in contact with the sheave in the other end. Therefore, a second Lagrangian mesh, apart of the ALE mesh used to discretize the rope, is used to define the fixed ends of the bristles. The kinematics and dynamics used to calculate the normal and tangential contact forces are described in detail. The contact model is 3D and can be used to analyze the contact with a sheave groove with arbitrary shape. The tangential contact force model can be used to describe stick and slip contact conditions and, to improve the simulation performance of the model, an LuGre regularization tangential contact force model is used. The rope-sheave contact model is used to analyze the behavior of a simple elevator system. The numerical results show that the static rope-sheave contact interaction agrees well with an analytical solution of the problem. Finally, the same elevator system is analyzed dynamically for a cabin ride of 8 meters with a steady velocity of 1 m/s. Results show that the normal and tangential contact forces during the steady velocity period are not so different from the static solution, but very different from the classical Creep Theory and Firbank's Theory.

Sliding Dynamics Modeling and Kinematic Characteristic Analysis of Suspension Ropes on Elevator Traction Sheave

Modeling and Analysis for Dynamic Behavior of Elevator Traction System under the Braking of Safety Gear

Research On The Vertical Dynamics Of High-Speed Elevator System - Art. No. 60400v

Research on the vertical dynamics of high-speed elevator system

Vibration Analysis of High-speed Traction Elevator Based on Guide Roller-rail Contact Model

Dynamic analysis of high-speed traction elevator and traction car–rope time-varying system

Dynamic Modeling of Elevator System for Emergent Behavior

Time-varying Element Model of High-Speed Traction Elevator and Its Horizontal Vibration Response Analysis

Thermo-mechanical Modeling and Transient Analysis of Frictional Braking of Elevator Safety Gear

Dynamic Modeling And Analysis Of Three-Dimensional Slack Cables With Application To Elevator Traveling Cables

Study on Theoretical Model and Test Method of Vertical Vibration of Elevator Traction System

Vertical Vibration Modeling for 2:1-Roping Traction Elevator System

Three-dimensional dynamic modeling and analysis of moving elevator traveling cables

Dynamics And Control Of Elevators With Large Gaps And Rubber Dampers

Research on Dynamic Control Model of Multi-Scenario Synchronization in Aircraft Suspension Lifting System

Experimental And Theoretical Investigations On Friction Modeling Concerning Accelerations In Elevator Systems

Rope–sheave contact transient analysis in hoisting operations with a bristle model and an arbitrary Lagrangian–Eulerian approach

A Data-Driven Approach for Modifying the Rope Dynamics Model of the Flexible Hoisting System

Structural Dynamics of Elevator Counterweight Systems and Evaluation of Passive Constraint

Experimental Investigation of Friction and Slip at the Traction Interface of Rope and Sheave

Simulation for Electromechanical Coupling Model of Elevator Systems