Abstract:High-resolution and multichannel time-to-digital converters (TDCs) are needed in many electrical application systems. A new multistep fine time measurement method is proposed in this work, which is based on the delay-adjustable looped carry chains to obtain both high resolution and measurement precision. Each sub-step of the fine time measurement is assigned with a different measurement resolution in the descending order by dynamically configuring the delay line length. The time residue to be measured in the following sub-step becomes smaller, so that a finer resolution can be chosen. The overall oscillation number is the summation of the oscillation number of each sub-steps. The resolution of the TDC is determined by the last sub-step. So both high-resolution and small oscillation number (corresponding to high measurement precision) can be obtained. The TDC circuit was implemented on Stratix III field programmable gate array (FPGA) chip. Test results showed that the obtained resolution was less than 10 ps, and the measurement precision root mean square (rms) was about 13 ps. The differential nonlinearity (DNL) error and the integral nonlinearity (INL) error were in the range of −1 least significant bit (LSB) to 1 LSB without any bin calibration. The resource cost per TDC channel includes the lookup table (LUT) cost of 1064 and register cost of 318. The obtained TDC is comprehensively good considering its low resource cost and high linearity, and it is promising for multichannel TDC design.

Time Interval Measurement Based on Fine-Time Synthesis Module

A Two-Step Time-to-Digital Converter with 5.6ps Resolution and 1 - 4255μs Measurement Range

A High-Resolution TDC Design Based on Multistep Fine Time Measurement by Utilizing Delay-Adjustable Looped Carry Chains on FPGAs

A Low-Cost FPGA-Based Coarse-Fine Counting Time-to-Digital Converter With External High-Precision Reference Clock

A High-Throughput Vernier Time-to-Digital Converter on FPGAs with Improved Resolution Using a Bi-Time Interpolation Scheme

Method of Fiber Transfer Delay Measurement Based on Phase Quantization and Delay Synthesis

A high precision TDC based on a multi-phase clock

High precise time delay measurement in optical fiber

A High Resolution Time-to-digital-convertor Based on a Carry-Chain and DSP48E1 Adders in a 28-Nm Field-Programmable-gate-array

Time Interval Analyzer with FPGA-based TDC for Free Space Quantum Key Distribution: Principle and Validation with Prototype Setup

High-precision Fiber-Optic Two-Way Time Transfer Network with Time–frequency Transform Measurement

Design of a high-precision time-to-digital converter in an Elitestek Ti60 field-programmable-gate-array

A low-power coarse-fine time-to-digital converter in 65nm CMOS

A reconfigurable calibration-free digital-to-time converter based on a high-speed transceiver

Hundred-Femtosecond-Level Concise Optical Time Delay Measurement System Based on Linear Optical Sampling

Carry chain based multi-channel time-to-digital converter

A High Resolution Time-to-Digital Converter (TDC) Based on Self-Calibrated Digital-to-Time Converter (DTC).

A 10b, 0.7ps resolution coarse-fine time-to-digital converter in 65nm CMOS using a time residue amplifier

Multichannel precision time delay measurement in optical fibers

Fiber based time and frequency synchronization system

A time-to-digital converter with steady calibration through single-photon detection