Abstract:Drying is a very important unit operation in many industries such as food, pharmaceuticals, chemicals and ceramics. In most cases, wet materials are dried by forced convection using hot air flow. Heat and mass transfer processes during drying have been studied by both experimental and numerical simulation methods. For the purpose of studying the mechanism of heat and mass transfer and stress-strain distribution during the hot air drying of biological porous medium, two-way coupled thermo-hydro-mechanical mathematical model has been developed to simulate the hot air convective drying process of biological porous media on basis of Fickian diffusion theory, Fourier’s law of heat conduction and thermoelasticity mechanics. The following assumptions were made in order to find a solution to the hot air drying model: the biological porous medium was homogeneous and isotropic; the deformation during drying was elastic. The transient model, composed of a system of partial differential equations, was solved by finite difference methods. The computational procedure was programmed using C language. Some physical and mechanical properties of carrot changing with dry basis moisture content and temperature were considered. The numerical results were compared with available experimental data obtained during the drying of potatoes and carrots. The relative errors between numerical results and experimental data were both less than 5%, which showed the numerical results obtained using the mathematical model were in good agreement with the experimental data. Numerical simulations of the drying curve variations and the spatio-temporal distributions of moisture, temperature and drying stresses and strains of carrot were also evaluated. The temperature and moisture content showed a gradient inside carrot slice during drying. As the drying process proceeded, the temperature inside the carrot slice initially increased to reach the wet bulb temperature of the environment and eventually leveled off. The dry basis moisture content inside the carrot slice decreased, with the fastest decreased at the heat and mass transfer interface, eventually reached the equilibrium moisture content of the potato and leveling off. Both the moisture content gradient and the temperature gradient decreased gradually in the thickness direction. The normal stress was negative in all parts of the carrot slice, and the larger the closer to the evaporation interface. The shear stress was positive in all parts of the carrot slice, and the maximum shear stress occurred in the middle of the carrot slice. As in the case of the normal stress, the values of the normal strain were negative. The change trend of normal strain with time was consistent with that of moisture content. These results indicated that the observed physical deformations were caused by the dehydration of carrot slice during drying. The influence of drying conditions, such as air temperature, air velocity and the thickness of porous media on drying process was analyzed. Analysis showed that under certain drying conditions, the higher air temperature, the greater air velocity and the thinner slice thickness, the shorter drying time. This work should help in developing an understanding of the relationship between mass and heat transfer, shrinkage, stress, strains and physical degradation.

Heat and Mass Transfer and Deformation During Chiffon Cake Baking

Batter quality

Modelling heat and mass transfer in bread baking with mechanical deformation

Microscale Modelling of Flow, Heat and Mass Transport During Vacuum Cooling of Porous Foods: Effective Property Computation

Mass-Transfer Simulation Software Study of Sliced Porous Production During Convection Drying Process

Heat and Mass Transfer in Unsaturated Porous Cake with Heated Walls

Heat-transfer simulation of slice potato during drying.

Chiffon Cakes Made Using Wheat Flour With/Without Substitution by Highland Barley Powder or Mung Bean Flour: Correlations Among Ingredient Heat Absorption Enthalpy, Batter Rheology, and Cake Porosity

A heat transfer model for liquid film boiling on micro-structured surfaces

Shrinkage During Vacuum Cooling of Porous Foods: Conjugate Mechanistic Modelling and Experimental Validation

Mathematical Model and Numerical Simulation of Biological Porous Medium During Hot Air Drying

Fractal Pore Network Simulation on the Drying of Porous Media

Modeling Transport in Porous Media With Phase Change: Applications to Food Processing

Simulation investigation of the effect of heating temperature and porosity of porous media on the water evaporation process

BOILING HEAT TRANSFER ON SURFACES COATED BY POROUS WICK WITH VAPOR CHANNELS

Role of Trapped Liquid in Flow Boiling Inside Micro-Porous Structures: Pore-Scale Visualization and Heat Transfer Enhancement.

Multiphase porous media model with thermo-hydro and mechanical bidirectional coupling for food convective drying

Effects of Surface Wettability on Bubble Departure and Critical Heat Flux: A Parametric Study Based on 3-D Dynamic Force Analysis Model

3D modelling of coupled mass and heat transfer of a convection-oven roasting process

Enhanced Heat Transfer Using Wafer-Scale Crack-Free Well-Ordered Porous Structure Surface

Pore development in viscoelastic foods during drying