Abstract:Solid-state lithium metal batteries (SSLMBs) have been widely predicted as an "enabler" for the next-generation high-energy-density batteries. To perform this goal, both solid electrolytes (SEs) and metallic Li anodes are the keys. Li-rich garnet SEs exhibit many unique advantages for enabling SSLMBs, such as high Li-ion conductivity, superior mechanical, chemical and electrochemical properties. However, the garnet-based SSLMBs suffer from intractable interfacial problems including poor-contact-induced high interfacial impedance and dendrite-induced fast short circuit, which greatly hinder their practical application. In this work, a facile and low-cost artificial interface engineering is proposed to improve Li/SEs interface. Benefitted from the superior wettability of iso-propanol InCl3 solution on the Li6.4La3Zr1.4Ta0.6O12 (LLZTO) surface, a homogeneous and tightly-adhering lithiophilic interface consisting of InLix and LiCl is efficiently constructed. As a result, the interface impedance was decreased from 189 to 10 Omega, and the critical current density for the LLZTO is increased from 0.2 mA cm(-2) to 0.7 mA cm(-2). The Li/Li symmetric cells can work stably above 4000 h at a current density of 0.2 mA cm(-2). At a higher current density of 0.45 mA cm(-2), no obvious dendritic Li proliferation and interfacial contact failure is observed after cycling for more than 1000 h. The full cells with LiFePO4 as cathode exhibit a superior electrochemical performance with a reversible capacity of 127 mAh g(-1) at 0.5 C after 475 cycles, and a rate capability of 101 mAh g(-1) at 1 C. This effective, simple and economical wet-chemistry strategy for constructing Li/SEs artificial interface may provide an alternative route for solve the interfacial issues of other SSLMBs.

A Mortise-Tenon-like Ionic/electronic Conductive Interface Facilitates Long-Cycle Solid-State Lithium Metal Batteries

Mortise-tenon-like ionic/electronic conductive interface facilitates long-cycle solid-state lithium metal batteries

A Superior Stable Interlayer For Dendrite-Free Solid-State Lithium Metal Batteries

A lithium–tin fluoride anode enabled by ionic/electronic conductive paths for garnet-based solid-state lithium metal batteries

A Facile and Low-Cost Wet-Chemistry Artificial Interface Engineering for Garnet-Based Solid-State Li Metal Batteries

Interface engineering of Li6.75La3Zr1.75Ta0.25O12via in situ built LiI/ZnLix mixed buffer layer for solid-state lithium metal batteries

Interface Engineering for Garnet-Type Electrolyte Enables Low Interfacial Resistance in Solid-State Lithium Batteries

Ion/Electron Conductive Layer with Double-Layer-Like Structure for Dendrite-Free Solid-State Lithium Metal Batteries

Enabling an Electron/ion Conductive Composite Lithium Anode for Solid-State Lithium-Metal Batteries with Garnet Electrolyte

High-Performance Solid-State Lithium Metal Batteries of Garnet/Polymer Composite Thin-Film Electrolyte with Domain-Limited Ion Transport Pathways.

Built-in superionic conductive phases enabling dendrite-free, long lifespan and high specific capacity composite lithium for stable solid-state lithium batteries

In-situ construction of Li-Mg/LiF conductive layer to achieve an intimate lithium-garnet interface for all-solid-state Li metal battery

High-performance Solid-State Lithium Metal Batteries Achieved by Interface Modification

An in Situ-Formed LiI Interface Layer for Garnet-Based Lithium Metal Batteries

Integrated Design of a Functional Composite Electrolyte and Cathode for All-Solid-State Li Metal Batteries

Fast Li-ion transport pathways via 3D continuous networks in homogeneous garnet-type electrolyte for solid-state lithium batteries

High Rate and Stable Solid-State Lithium Metal Batteries Enabled by Electronic and Ionic Mixed Conducting Network Interlayers

A 3D Cross‐Linking Lithiophilic and Electronically Insulating Interfacial Engineering for Garnet‐Type Solid‐State Lithium Batteries

Superlithiophilic, Ultrastable, and Ionic‐Conductive Interface Enabled Long Lifespan All‐Solid‐State Lithium‐Metal Batteries under High Mass Loading

In-situ constructed lithium-salt lithiophilic layer inducing bi-functional interphase for stable LLZO/Li interface

High-Performance Composite Lithium Anodes Enabled by Electronic/Ionic Dual-Conductive Paths for Solid-State Li Metal Batteries