Abstract:The fabrication of compact, continuous, and large-scale metal organic framework (MOF) membranes with high permeability and H-2/CO2 selectivity remains challenging because of the wake interaction between the MOF membrane and the substrate. In addition, substrates with smooth and plain surfaces and suitable pore size are required to prepare high-quality MOF membranes because it is difficult to obtain dense and continuous MOF membranes on a substrate with large pores and rough surfaces. To overcome these challenges, numerous MOF membrane growth methods have emerged, including in situ (direct) growth, secondary (seeded) growth, and layer-by-layer growth methods as well as electrostatic spinning and the chemical modification of the substrate. Among these methods, usage of substrates suitable for surface-functionalization is a promising technique. Herein, Al2O3 was selected as the substrate and was coated with PIM-1 (one polymer of intrinsic microporosity), followed by carboxylation of PIM-1 to furnish a large number of carboxyl groups on the surface. In situ growth of the MOF membrane using the interactions between the carboxyl group and the metal yielded two types of compact, continuous, and large-scale polymer-supported MOF membranes (PIM-1-COOH/ZIF-8 and PIM-1-COOH/HKUST-1). Furthermore, the fabricated polymer-supported MOF membrane structures were investigated by powder X-ray diffraction (XRD) and scanning electron microscopy (SEM). Gas separation experiments were performed to explore the gas permeability and selectivity of the prepared MOF membranes. The XRD characterization confirmed the pure phase and high crystallinity of the MOF membranes. The SEM images showed that the MOF membranes were compact and continuous with a tight combination between the MOF crystal membrane and the substrate. Gas separation measurements showed that both MOF membranes exhibited high H-2 permeability and selectivity for H-2/CO2. For the PIM-1-COOH/ZIF-8 and PIM-1-COOH/HKUST-1 membranes, the 1 : 1 binary mixtures gas separation factors of H-2/CO2 calculated as the gas molar ratios in the permeate and retentate side 7.32 and 9.69, respectively, at room temperature and atmospheric pressure. The H-2/CO2 mixture separation factors of the two MOF membranes exceeded the corresponding Knudsen constants (4.7), with H-2 permeances higher than 3.16 x 10(-6) and 1.14 x 10(-6) mol.m(-2).s(-1).Pa-1, respectively. The ideal separation factors of H-2/CO2 of both MOF membranes calculated as the ratio of single gas permeances were 7.70 and 12.04, respectively, with the respective H-2 permeances of up to 3.73 x 10(-6) and 3.86 x 10(-6) mol.m(-2).s(-1).Pa-1. Because of their outstanding characteristics, these novel MOF membranes can be widely used in the fields of H-2 purification and separation.

Polydopamine-assisted Minute Fabrication of Vertically Aligned ZIF-L Membranes for CO2/N2 2 /N 2 Separations

Stiff Metal–organic Framework–polyacrylonitrile Hollow Fiber Composite Membranes with High Gas Permeability

Zeolite Imidazolate Framework Membranes on Polymeric Substrates Modified with Poly(vinyl Alcohol) and Alginate Composite Hydrogels.

Polymer-functionalized Metal-Organic Framework Nanosheet Membranes for Efficient CO2 Capture

Self-assembly of defect-free polymer-based zeolite imidazolate framework composite membranes with metal-phenolic networks for high efficient H<sub>2</sub>/CH<sub>4</sub> separation

ZIF-L Membrane with a Membrane-Interlocked-support Composite Architecture for H2/CO2 Separation

Large‐Area Ultrathin Metal‐Organic Framework Membranes Fabricated on Flexible Polymer Supports for Gas Separations

Fabrication of Polymer-Supported Metal Organic Framework Membrane and Its Gas Separation Performance

In situ electrochemical potential-induced synthesis of metal organic framework membrane on polymer support for H2/CO2 separation

Ultrathin Low‐Crystallinity MOF Membranes Fabricated by Interface Layer Polarization Induction

Fabrication of MOFs/PDMS Mixed Matrix Membranes and Defect-Free Composite Membranes for Efficient Air Separation

Flexible and Highly-Loaded Mixed-Matrix Membrane with Bi-Continuous Metal–organic Frameworks Transfer Pathway for Gas Separation

t growth of highly oriented metal – organic framework nanosheet membranes for H 2 / CO 2 separation †

Growth of ZnO Self-Converted 2D Nanosheet Zeolitic Imidazolate Framework Membranes by an Ammonia-Assisted Strategy

Zeolite imidazolate framework composite membranes prepared on amine/tannic acid cross-linked polymeric hollow fiber substrates for enhanced gas separation

Constructing MOF-doped two-dimensional composite material ZIF-90@C<sub>3</sub>N<sub>4</sub> mixed matrix membranes for CO<sub>2</sub>/N<sub>2</sub> separation

Ultrathin ionic COF Membrane via Polyelectrolyte‐Mediated Assembly for Efficient CO2 Separation

Polymer-supported ultra-thin ZIF-67 membrane through in situ interface self-repair

Constructing Polymer/metal-Organic Framework Nanohybrids to Design Compatible Polymer-Filler-polymer Membranes for CO2 Separation

Flexible Soft-Solid Metal-Organic Framework Composite Membranes for H2 /CO2 Separation

Aqueously Cathodic Deposition of ZIF‐8 Membranes for Superior Propylene/Propane Separation