Abstract:The interface toughening effect and toughening mechanism of low-density aramid staple fiber on the carbon fiber reinforced epoxy resin composite(CF/EP)-aluminum honeycomb sandwich structure were studied. A composite sandwich beam was prepared, and a thin layer of 6 mm Kevlar short fibers was made into a thin layer of flocculent fibers for the toughening of the sandwich beam interface layer. The asymmetric double cantilever beam experiment was used to measure the interface fracture toughness of toughened and un-toughened sandwich beams. Compared with the un-toughened sandwich beam specimens, the average critical energy release rate of the toughened specimens is increased by 91%, and the average critical load is increased by 55%. The addition of the aramid staple fiber toughening layer only increases the quality of the sandwich beam by 0.36%, which shows that the method in this paper has a good toughening effect and efficiency. Scanning electron microscopy was used to observe the cross-sectional morphology and characteristics of the sandwich beam interface. The microscopic observation results show that during the expansion of the interface crack, the aramid staple fiber forms a bridging microstructure between the panel and the core, and passed behaviors such as fiber pull-out, fiber peeling, fiber breakage, etc., improve the dissipation energy and critical load of interface crack propagation. On the other hand, in the surplus area of the resin “round corners” around the honeycomb panel, the aramid short fiber can also improve the bonding performance of the resin and the honeycomb panel, and prevent the honeycomb panel from being pulled out due to the small contact area with the panel. This paper quantitatively measured the macro-toughening effect of aramid short fibers on the CF/EP-aluminum honeycomb interface, and explained its micro-toughening mechanism. The related findings can provide guidance for improving the safety and reliability of composite sandwich structures.

Research on Interlayer Toughening and Damage Detection of Laser-Induced Graphene and Short Kevlar Fibers Aramid Fiber/Epoxy Resin Composites

Low-velocity Impact Damage Research on CFRPs with Kevlar-fiber Toughening

Laser induced graphene for in situ damage sensing in aramid fiber reinforced composites

Cellulose Nanocrystal-Polyetherimide Hybrid Nanofibrous Interleaves for Enhanced Interlaminar Fracture Toughness of Carbon Fibre/epoxy Composites

Interfacial Toughening and Toughening Mechanism of Aramid Staple Fiber to Carbon Fiber Reinforced Epoxy Resin Composite-Aluminum Honeycomb Sandwich Structure

Research on Interlayer Properties of Short Fiber Intercalated Carbon Fiber/epoxy Composites

Modelling of Inter-Laminar Toughening from Chopped Kevlar Fibers

Effects of Carbon/Kevlar Hybrid Ply and Intercalation Sequence on Mechanical Properties and Damage Resistance of Composite Laminates under Quasi-Static Indentation

Interlaminar fracture toughness of carbon/epoxy composites laminates toughened by short carbon fiber

Thermosetting CFRP interlaminar toughening with multi-layers graphene and MWCNTs under mode I fracture

Enhanced damage tolerance and fracture toughness of lightweight carbon-Kevlar fiber hybrid laminate

Interlaminar mechanical properties of nano- and short-aramid fiber reinforced glass fiber-aluminum laminates: a comparative study

Compression Performances and Interfacial Properties of Carbon Fiber-Foam Metal Sandwich Beams with Aramid Fiber Toughening

Graphene/epoxy Interleaves for Delamination Toughening and Monitoring of Crack Damage in Carbon Fibre/epoxy Composite Laminates

Improving Interlaminar Fracture Toughness and Impact Performance of Carbon Fiber/Epoxy Laminated Composite by Using Thermoplastic Fibers

Failure behavior and damage visualization of thick carbon/aramid hybrid woven composites under flexural loading conditions

Mode-I analysis of glass fiber-reinforced polymer laminates toughened by interleaved polyamide 66 nanofibers and chopped carbon using acoustic emission

Fracture Toughness Determination and Mechanism for Mode-I Interlaminar Failure of 3D-Printed Carbon-Kevlar Composites

Low-velocity impact and compression-after-impact behaviors of twill woven carbon fiber/glass fiber hybrid composite laminates with flame retardant epoxy resin

Layer-wise damage prediction in carbon/Kevlar/S-glass/E-glass fibre reinforced epoxy hybrid composites under low-velocity impact loading using advanced 3D computed tomography

Flexural progressive damage and failure behavior of carbon-aramid/epoxy hybrid woven composites