Abstract:<p>Recently, numbers of studies have been conducted by using nanoparticles as novel foam stabilizer to enhance oil recovery (EOR). However, previous studies have not classified the nanoparticles into hydrophilic and hydrophobic/modified to explain the influence factors and mechanisms of different wettability nanoparticles stabilizing foam. Moreover, the mechanisms of nanoparticles stabilizing foam for EOR and the nanoparticles modification mechanism have not been discussed amply. In this review, the control parameters and the mechanisms of hydrophilic and hydrophobic nanoparticles on foam stability were discussed, and methods to evaluate foam stability were summarized. Meanwhile, the mechanisms of nanoparticles modification were introduced. Finally, the direction of the future studies and their application limitations were also pointed out. The main factors affected the application of nanoparticles stabilized foam included the types of nanoparticles, the modifiers for nanoparticles, the salinity, temperature and the concentration ratio between nanoparticles and surfactant. Both hydrophilic and hydrophobic nanoparticles could enhance the detachment energy, form network structure to stabilize foam. The synergistic effects between nanoparticles and surfactant and the existence state of nanoparticles on lamellae were different between hydrophilic and hydrophobic nanoparticles. NPs-foam could improve sweep efficiency in reservoir, emulsify the crude oil and flow into low permeability pores by fluid diversion. The foam stability measurement methods included viscosity measurement, core flooding experiment, foam thickness and size measurement, drop pressure measurement in dynamic state, and half-life time of foam in static state. It can be concluded that the synergistic effects influenced the hydrophobicity of nanoparticles, the moderate hydrophobic (contact angle ∼90º) nanoparticles were the optimum for stabilizing foam. For modified nanoparticles, the modified routes should be refined to identify the optimal modifier and synthesis route. The control parameters of nanoparticles stabilized foam should be studied further, and the low-cost and environmentally friendly nanoparticles could be the potential foam stabilizer.</p>

Enhancing the Stability and Practical Application of CO2-Responsive Foam with Nanoparticles: the Role of Salt Ions

Investigations on the Influencing Mechanisms of SiO 2 Nanoparticles on Foam Stability

A Novel Supercritical CO2 Foam System Stabilized With a Mixture of Zwitterionic Surfactant and Silica Nanoparticles for Enhanced Oil Recovery

Temperature and salt resistant CO2 responsive gas well foam: Experimental and molecular simulation study

Synergistic improvement of foam stability with SiO2 nanoparticles (SiO2-NPs) and different surfactants

Design of nanoparticles for generation and stabilization of CO2-in-brine foams with or without added surfactants

Nano-stabilized foam for enhanced oil recovery using green nanocomposites and anionic surfactants: An experimental study

Interfacial Rheology of Foam Stabilized by Nanoparticles and Their Retention in Porous Media

Nanoparticle-Surfactant Stabilized Strong Foam for Enhanced Oil Recovery in High-Salinity Fractured Carbonate Reservoirs

Utilization of Surfactant-Stabilized Foam for Enhanced Oil Recovery by Adding Nanoparticles

Stability of high-salinity-enhanced foam: Surface behavior and thin-film drainage

Investigation of the Effect of Nanoparticle-Stabilized Foam on EOR: Nitrogen Foam and Methane Foam

Role of nanoparticles in the performance of foam stabilized by a mixture of hydrocarbon and fluorocarbon surfactants

Effect of selected monovalent salts on surfactant stabilized foams

Experimental and data-driven analysis for predicting nanofluid performance in improving foam stability and reducing mobility at critical micelle concentration

Nanoparticle and Surfactant Stabilized Carbonated Water Induced In-Situ CO 2 Foam: An Improved Oil Recovery Approach

Nanoparticles as foam stabilizer: Mechanism, control parameters and application in foam flooding for enhanced oil recovery

Study on Thermal Stability of Gel Foam Co-Stabilized by Hydrophilic Silica Nanoparticles and Surfactants

Influence of nanoparticles on the foam thermal stability of mixtures of short-chain fluorocarbon and hydrocarbon surfactants

The CO2-in-water foam stabilized with the mixture of CO2-soluble surfactant and nonionic surfactant