Abstract:Manganese oxide (MnO)x with earth-abundance and low toxicity have received considerable interest for advanced oxidation processes (AOPs) but suffer from poor catalytic activity and stability. Herein, a unique hybrid hollow structure with ultrasmall size MnOx quantum dots (QDs, 3 nm) homogeneously dispersed on N-doped porous carbon shells (denoted as MnOx/N-HPCS) was designed as heterogeneous Fenton-like catalyst. The ultrafine nanoscaling morphology of MnOx QDs enlarges its specific surface area (227.9 m(2)/g) for providing more active sites. The N-doped carbon (NC) shells can not only greatly improve the conductivity of the hybrid and effectively prevent the aggregation of MnOx QDs, but serve as metal-free active sites for Fenton-like reaction. While the hollow porous structure enables the fast transportation of reactants access to the full-exposure active sites. When evaluated as catalyst for peroxymonosulfate (PMS) activation, the MnOx/N-HPCS hybrid outperformed other benchmark catalysts toward the removal of bisphenol A (BPA) with highest removal rate of 0.29 min(-1). Results showed that exceed 99% of BPA (10 mg L-1) was removed within 20 min at the dosage of 0.2 g L-1 PMS and 0.06 g L-1 MnOx/N-HPCS. Moreover, the mechanism of PMS activation by MnOx/N-HPCS was studied. The mixed valence states of Mn, the hydroxyl species induced complexation of equivalent to Mn((3+/4+))-PMS and the metal-free N-doped sites synergistically enhancing the generation of reactive oxygen species ((OH)-O-. and SO4.-). Furthermore, the MnOx/N-HPCS catalyst also displayed good reusability (successive 4 runs) with negligible Mn leaching (less than 2 mu g L-1). Together with the investigation of the application in real environment water samples (such as tap water and wastewater), we demonstrated this novel Mn-based AOPs catalyst with unique structure and high activity will hold great potential in environmental remediation.

Enhanced Formaldehyde Oxidation of Plywood Using MnO2 Nanoflowers Supported on Porous Hydrothermal Carbon at Ambient Temperature

Catalytic Ozonation of Formaldehyde with an Oxygen-Vacancy-Rich MnOx/γ-Al2O3 Catalyst at Room Temperature

Enhanced and Sustainable Removal of Indoor Formaldehyde by Naturally Porous Bamboo Activated Carbon Supported with MnOx: Synergistic Effect of Adsorption and Oxidation

Adhesion properties and formaldehyde emissions of MnO2/UF nanocomposite adhesives

Synthesis of Pt-Loaded NiFe-LDH Nanosheets on Wood Veneer for Efficient Gaseous Formaldehyde Degradation

Facile Preparation, Characterization, and Formaldehyde Elimination Performance of MnOx/natural Loofah Composites

The Removal of Formaldehyde from Urea Formaldehyde Adhesive by Sodium Borohydride Treatment and Its Application in Plywood

Preparation of a Novel Formaldehyde-Free Impregnated Decorative Paper Containing MnO 2 Nanoparticles for Highly Efficient Formaldehyde Removal

Study on the Formaldehyde Oxidation Reaction of Acid-Treated Manganese Dioxide Nanorod Catalysts

Highly porous CuO/MnO2 catalyst prepared by gas release-assisted technology and its enhancement of formaldehyde removal efficiency

Graphene oxide a promising formaldehyde scavenger of phenolic resin‐bonded plywood: From elaboration to evaluation

Stable Incorporation of MnOx Quantum Dots into N-doped Hollow Carbon: A Synergistic Peroxymonosulfate Activator for Enhanced Removal of Bisphenol A

Study of manganese–cerium composite oxide catalysed oxidation for low concentration formaldehyde at room temperature

Excellent Stability for Catalytic Oxidation Formaldehyde over Defective Δ-Mno2 Nanoparticles at Room Temperature

Facile In-Situ Synthesis of Manganese Dioxide Nanosheets on Cellulose Fibers and their Application in Oxidative Decomposition of Formaldehyde

Enhanced oxidative ability, recyclability, water tolerance and aromatic resistance of α-MnO2 catalyst for room-temperature formaldehyde oxidation via simple oxalic acid treatment

Catalytic activity of laundering durable fiber-based manganese dioxide catalyst targeting indoor formaldehyde

Degradation of Low Concentration Formaldehyde by Mesoporous MnO2 at Room Temperature

The catalytic efficacy of modified manganese-cobalt oxides for room-temperature oxidation of formaldehyde in air

Synergy of the successive modification of cryptomelane MnO2 by potassium insertion and nitrogen doping for catalytic formaldehyde oxidation

Efficient MnOx supported on coconut shell activated carbon for catalytic oxidation of indoor formaldehyde at room temperature