Abstract:Solar power tower system with an external receiver is one of the most promising technologies for electricity generation and has a high concentration ratio and a high operating temperature range. In this paper, a lab-scale external receiver with xenon lamps, using molten salt as a heat transfer fluid, was established, and its optical and thermodynamic properties were evaluated. Experimental and numerical methods were used to analyze the performance of the receiver. For the base case (100% light power, no wind, 2.3 kg/s mass flow, and 400 °C inlet temperature), the deviation in the maximum temperature of the wall determined through numerical simulation and thermal imager measurement was 1.8%; the deviation in the back temperature of the receiver identified through simulation and thermocouple measurement was 0.22%. The performance of the receiver under different working conditions was also explored. Experimental and simulation results had good agreement at different mass flow rates, light power, and wind speed, and the deviation under each condition was less than 5%. The experimental results showed that the temperature rise of molten salt increased from 4.3 °C to 7.4 °C when the inlet temperature increased from 375 °C to 500 °C; the temperature rise of molten salt increased from 1.8 °C to 5.3 °C when the power of the xenon lamps increased from 20% to 100%; the temperature rise of molten salt decreased from 8.3 °C to 5.3 °C when the mass flow rate increased from 1.4 kg/s to 2.3 kg/s; and the temperature rise of molten salt decreased from 5.3 °C to 3.6 °C when the wind velocity increased from 0 to 10 m/s. The practical and simulation results present useful reference sources for fellow researchers and practitioners in the sector of the solar power tower system.

Transient Response Performances and Control Strategy of Porous Volumetric Solar Receivers with Different Heat Transfer Fluids

Numerical Study on the Transient Thermal Performance of a Lab-Scale Molten Salt Receiver

Modeling and dynamic simulation of receiver in a solar tower power station

A Practical Method to Evaluate the Thermal Efficiency of Solar Molten Salt Receivers

Numerical Investigation on Porous Media Heat Transfer in A Solar Tower Receiver

Analysis on the Effects of Different Receiver Structures and Porous Parameters on the Volumetric Effects and Heat Transfer Performance of Porous Volumetric Solar Receiver

Study on Heat Transfer and Stress Characteristics of the Pressurized Volumetric Receiver in Solar Power Tower System

A Feedback Control Strategy to Regulate the Temperature in a Nonlinear Solar Receiver

Coupled optical and thermal simulation of the thermal performance of a 50 MWe external cylindrical solar receiver

Study on Outlet Temperature Control of External Receiver for Solar Power Tower

Optical and Thermal Performance of a Novel Solar Particle Receiver

Dynamic Thermal Transport Characteristics of a Real-Time Simulation Model for a 50 MW Solar Power Tower Plant

Experimental and Numerical Evaluation of a Lab-Scale External Solar Receiver

Optimization of solar receivers for high-temperature solar conversion processes: Direct vs. Indirect illumination designs

Coupled optical-thermal-stress characteristics of a multi-tube external molten salt receiver for the next generation concentrating solar power

Response characteristics of external receiver for concentrated solar power to disturbance during operation

An optimized model and test of the China’s first high temperature parabolic trough solar receiver

Dynamic Performance of Water-Based Radiant Floors During Start-Up and High-Intensity Solar Radiation

Thermo-mechanical performance enhancement of volumetric solar receivers using graded porous absorbers

Numerical Evaluation on the Thermal Performance of the Solar External Cylinder Receiver Using Monte Carlo Ray-Tracing Algorithm

A feedforward-feedback control strategy based on artificial neural network for solar receivers