Use of Resonant Acoustic Fields as Atmospheric-Pressure Ion Gates

Jacob Shelley,Julia Danischewski,Yi You,Lauren Bauer,Jens Riedel

DOI: https://doi.org/10.26434/chemrxiv-2024-qqh2s

2024-10-14

Abstract:Ion optics are crucial for spectrometric methods such as mass spectrometry (MS) and ion mobility spectrometry (IMS). Among the wide selection of ion optics, temporal ion gates are of particular importance for time-of-flight MS (TOF-MS) and drift-tube IMS. Commonly implemented as electrostatic ion gates, these optics offer a rapid, efficient means to block ion beams and form discrete ion packets for subsequent analysis. Unfortunately, these devices rely on pulsed high-voltage sources and are not fully transparent, even in their open state, which can lead to ion losses and contamination. Here, a novel atmospheric-pressure ion gate based on a resonant acoustic field structure is described. This effect was accomplished through the formation of a resonant, standing acoustic wave of alternating nodes and antinodes. Alignment of an atmospheric-pressure gaseous ion beam with an antinode, i.e. a region of transient pressure, of the acoustic structure acted as a gate and blocked ions from impinging ion-selective detectors, such as a mass spectrometer and a Faraday plate. The velocity of the ion stream and acoustic power were found to be critical parameters for gating efficiency. In the presence of an acoustic field (i.e. a closed gate), ion signals were decreased by as much as 99.8% with a response time faster than the readout of the ion-measurement devices used here (ca. 75 ms). This work demonstrates the basis for a low-cost, acoustic ion gate, which is optically transparent and easily constructed with low-power, off-the-shelf components, that can be used in MS and IMS instrumentation.

Chemistry

What problem does this paper attempt to address?

The problem this paper attempts to address is: existing ion optical devices (such as electrostatic ion gates) in mass spectrometers (MS) and ion mobility spectrometers (IMS) have certain drawbacks, including reliance on pulsed high-voltage power supplies, ion loss and contamination due to incomplete transparency, and other issues. To overcome these problems, the authors propose a new method for an atmospheric pressure ion gate based on a resonant acoustic field structure.

Specifically, the main objectives of the paper are:
1. **Develop a new type of atmospheric pressure ion gate**: Utilize a resonant acoustic field structure to form a stable standing wave, controlling the transmission of the ion beam through alternating pressure in the nodes and antinodes regions.
2. **Reduce ion loss and contamination**: Since this ion gate has no physical barriers, it can reduce ion loss and contamination, improving the sensitivity and resolution of the instrument.
3. **Achieve fast response**: The response time of this ion gate is very fast, capable of completing ion beam switching operations within milliseconds, making it suitable for time-of-flight mass spectrometry (TOF-MS) and drift tube ion mobility spectrometry (DT-IMS) technologies.
4. **Simplify construction and maintenance**: This ion gate uses low-cost, readily available components, making it easy to construct and maintain, thereby reducing the complexity and cost of the instrument.

Through these improvements, the authors hope to provide a more efficient, reliable, and economical ion gate solution for mass spectrometry and ion mobility spectrometry technologies.