Comparative Analysis of AC Copper Loss with Round Copper Wire and Flat Copper Wire of High-Speed Stator-PM Flux-Switching Machine
Wenfei Yu,Wei Hua,Zhiheng Zhang,Zhongze Wu,Peixin Wang,Weiguo Xia
DOI: https://doi.org/10.1109/tia.2022.3194042
IF: 4.079
2022-01-01
IEEE Transactions on Industry Applications
Abstract:In the high-speed flux-switching permanent magnet (FSPM) machine, the ac copper loss issue in the armature winding conductor is very prominent, due to the high-frequency leakage magnetic field in stator slot, which seriously affects the machine performance. To model and calculate ac copper loss more accurately, a coupled electric circuit-magnetic field model is constructed based on 2D-finite element method, and consequently the influence of modeling methods and winding types on ac copper loss calculation of a 12-slot/10-pole (12/10) 54.7 kW/10 kr/min FSPM machine is investigated. First, ten simplified ac copper loss calculation models are established to deal with the problem of large consumption of calculation time and computer resources caused by the excessive number of wires, small size of winding conductors, high precision modeling, and mesh refinement. Second, the influences of voltage-/current-source and steady/rotating rotor are considered, and the ten models are evaluated in terms of computing time and accuracy. Third, based on the preferred model from the ten models, the effects of frequency, round/flat wires, and wire sizes on ac copper loss are further studied. Fourth, to investigate the influence of flux leakage at the end of winding on ac copper loss, a 3-D ac copper loss calculation model with different axial lengths of winding end space is established. Fifth, the change process of ac copper loss and transient temperature of winding under short time overload condition are obtained combined with the bidirectional coupling model between electromagnetic and thermal field method through multiple iterations of electromagnetic loss and temperature. Finally, the stator modules of round and flat copper wires are manufactured, respectively, and an experimental modular device is built to measure the ac copper loss, which confirms the improved accuracy of the predictions by the proposed model.